This paper reports the synthesis of new transition metal oxide-modified CaO catalysts derived from eggshells for the transesterification of refined waste cooking oil. CaO is a well-known base catalyst for transesterification. However, its moderate basicity and low surface area have restricted its catalytic performance. Therefore, a new attempt was made to modify the CaO catalyst with transition metal oxides, including Ni, Cu and Zn oxides, via simple wetness impregnation method. The catalytic performance of the resulting modified CaO-based catalysts was evaluated through the transesterification reaction using refined waste cooking oil. The results showed that the NiO/CaO(10 : 90)(ES) catalyst calcined at 700 °C, demonstrated being highly potential as a catalyst. It gave the highest biodiesel production (97.3%) at the optimum conditions of 1 : 18 oil-to-methanol molar ratio, 6 wt% catalyst loading and 180 minutes reaction time as verified by response surface methodology (RSM). The high catalytic activity of NiO/CaO(10 : 90)(ES)(700 °C) was attributed to its high basicity (8.5867 mmol g−1) and relatively large surface area (7.1 m2 g−1). The acid value and free fatty acids of the biodiesel produced under optimal process conditions followed the EN 14214 and ASTM D6751 limit with 0.17 mg KOH per g (AV) and 0.09 mg KOH per g (FFA), respectively.
A series of new calamitic liquid crystals, 6-methoxy-2-(4-alkanoyloxybenzylidenamino)benzothiazoles, comprising a benzothiazole core, terminal methoxy group and a Schiff base linkage were synthesised and characterised. This series comprises 12 members wherein members differ by the length of the alkanoyloxy chain (Cn-1H2n-1COO-, where n = 2–8, 10, 12, 14, 16, 18). Their mesomorphic properties were studied by using differential scanning calorimetry, optical polarising microscopy and powder X-ray diffraction techniques. The short chain derivatives (n = 2 and 3) were non-mesogenic compounds, while an enantiotropic nematic phase was present throughout the remaining members of the series. The smectic C phase emerged from the decanoyloxy derivative onwards.
In this study, a series of TiO2 nanotubes (NTs) were synthesized employing electrochemical anodization of titanium foil in an ionic liquid solution containing a mixture of glycerol and choline chloride, acting as electrolyte. The as-synthesized TiO2 NTs were calcined at 350, 450, or 550 °C for a 2 h duration to investigate the influence of calcination temperature on NTs formation, morphology, surface properties, crystallinity, and subsequent photocatalytic activity for visible light photodegradation of gaseous formaldehyde (HCHO). Results showed that the calcination temperature has a significant effect on the structure and coverage of TiO2 NTs on the surface. Freshly synthesized TiO2 NTs showed better-ordered structure compared to calcined samples. There was significant pore rupture with increasing calcination temperature. The transformation from anatase to rutile phase appeared after calcination at 450 °C and the weight fraction of the rutile phase increased from 19% to 36% upon increasing the calcination temperature to 550 °C. The band gaps of the TiO2 NTs were in the range from 2.80 to 2.74 eV, shifting the active region of the materials to visible light. The presence of mixed anatase–rutile TiO2 phases in the sample calcined at 450 °C showed enhanced photoactivity, which was confirmed by the 21.56 mg∙L−1∙g−1 removal of gaseous formaldehyde under 120 min of visible light irradiation and displayed enhanced quantum yield, ∅HCHO of 17%.
A waste material with practically no cost, durian peel (DP) was studied for its ability to remove Basic blue 3 (BB3) from aqueous solutions. Batch kinetic studies were carried out to study the adsorption characteristics under various experimental conditions. The optimum pH for the dye removal occurred in the pH range of 3–10. Adsorption was found to be concentration dependent. The kinetics of dye adsorption fitted a pseudo-second order rate expression. Both Langmuir and Freundlich models appeared to provide reasonable fittings for the adsorption data of BB3 on DP. Application of Langmuir isotherm indicated that under the experimental condition of room temperature (25 ± 2°C) with natural pH of the dye solution and shaken at 150 rpm, the maximum adsorption capacity of DP for BB3 was 49.50 mg g−1. The percentage uptake of BB3 increased with the increase in temperature. Adsorption of BB3 was found to be endothermic and various thermodynamic parameters were evaluated using van’t Hoff plot.