29 January 2020 in IEEE Access
WiNoC has become a promising on-chip interconnect architecture. Due to the integration and manufacturing limits of wireless interconnects in nanotechnology, WiNoC systems are more susceptible to high failure rates. In this paper, we propose a novel fault-tolerant routing algorithm based on regional fault-aware techniques for link failures in WiNoC. We trade off performance and overhead by adopting 2-hop awareness for wireless nodes and 1-hop awareness for wired nodes. And the node status is not defined merely based on its own faulty condition but with a “double sensing” mechanism. Besides, since congestion is prone to occur around faulty nodes, we consider congestion mitigation in fault-tolerant algorithm design. Simulation results demonstrate that compared with several counterparts, the performance benefits clearly overweigh the overhead with acceptable area increase. The newly proposed routing algorithm significantly enhances the robustness of the system.
30 January 2020 in IEEE Access
Millimeter-wave (mm-Wave) technology has been widely adopted in recent wireless network-on-chip (WiNoC) design since it is fully compatible with current CMOS process. By employing efficient channel multiplexing mechanisms, the performance of WiNoCs can be improved. However, such improvement is very limited since the wireless channels are generally shared by multiple pairs of communicating nodes and as the network size scales up, the multiplexing mechanisms perform worse. In this work, more physically achievable mm-Wave channels are introduced in WiNoCs, based on which, a high-performance millimeter-wave multichannel WiNoC architecture is elaborated which includes designs of topology, routing and MAC mechanisms. Besides, to relieve the congestion in hubs, a congestion-aware adaptive channel-selection (CAACS) mechanism is also proposed. Simulation results show that such an architecture increases the saturated throughput by 16%~98% and by introducing the CAACS mechanism, the saturated throughput can be further improved by up to 17%. The average packet delay is also significantly reduced while just negligible area and energy overhead are produced.
1 August 2021 in Journal of Electronic Testing
9 May 2023 in Security and Communication Networks
By introducing wireless interfaces in conventional wired routers or hubs, wireless network-on-chip (WiNoC) is proposed to relieve congestion pressure from high volume inter-subnet data transmission. Generally, processing elements on chip receive input data and return feedback through network interface, and data transmission function in Network-on-Chip (NoC) is completed by routers. Hubs equipped with wireless interface are fixed to certain wired routers. While wireless channels may not be fully utilized due to unbalanced workload and constant hub-router connection, e.g., certain nodes processing excess inter-subnet data traffic are far away from hubs. In this paper, we proposed a workload-aware WiNoC design with intelligent reconfigurable wireless interface to improve wireless resources utilization and mitigate congestion. Through multidimensional analysis of traffic flow, a 4-layer neural network is trained offline and applied to analyze workload in each tile, and return three most potential tiles for wireless interface reconfiguration to fully utilize wireless channel and lowing latency. We also implement a historical traffic information-based reconfigurable scheme for comparation. Evaluation results show that in an 8 × 8 hybrid mesh topology, the proposed scheme can achieve 10%–16% reduction in network latency and 5%–11% increment in network throughput compared with fixed-link hub-node connection scheme under several mixed traffic patterns.
3 January 2024 in Journal of Circuits, Systems and Computers
27 November 2019 in Journal of Electronic Testing