7 September 2023 in IEEE Transactions on Plasma Science
Atmospheric pressure plasma jets (APPJs) can be driven by positive pulses, negative pulses, and sinusoidal ac excitations. The plasma jets under different excitations have different characteristics. In this article, a plasma jet system driven by three different power sources is established. The electrical and spectral characteristics of the jet as well as the vibration and rotation temperature of the plasma are studied. The results show that the peak discharge current of the pulsed plasma jet occurs along the rising and falling edges of the pulse voltage. The ac plasma jet will randomly appear with multiple discharge current pulses, but the peak current is much smaller than that of the pulse discharge current, and the input power of the sinusoidal ac plasma jet is significantly higher than that of the pulsed plasma jet. With the increase of discharge voltage, the length of the three plasma jets increases gradually, and the positive pulse plasma jets are the longest at each voltage. The luminescence intensity of three excitation particles (OH at 309.0 nm, N2 at 337.1 nm, and N2 at 357.6 nm) under three power sources was analyzed. The intensity of active particles in ac plasma jet is higher near the nozzle. With the increase of axial distance, the intensity of excited active particles in the positive-pulsed plasma jet increases. The rotating temperature of ac jet is 20–30k higher than that of pulse jet. The vibration temperature of pulsed plasma is higher than that of ac plasma jet. With the increase of jet axial distance, vibration temperature and rotation temperature change little.
5 September 2022 in IEEE Transactions on Plasma Science
Plasma jets have broad application in the fields of sterilization and material processing. In recent years, studies have shown that adding a small amount of active gas into a single inert gas can change the distribution of active particles in the plasma. This not only produces the desired active species but also changes the length of the jet to make it more suitable for plasma applications. In this article, the characteristics of plasma jets were studied under an argon atmosphere with a small amount of nitrogen and oxygen. By measuring the voltage and current waveforms, luminescence images, and emission spectra under the three mixed gases, the main parameters such as discharge power, the three main particle emission spectrum intensities (the OH spectral line, the second positive band of nitrogen molecules and its diffraction band, argon atomic line), electron excitation temperature, molecular vibration temperature, and molecular rotation temperature are calculated. The results show two discharges in one cycle under the square wave pulse voltage. The addition of nitrogen and oxygen reduces the peak current of the Ar plasma jet but increases the power. The addition of N2 increases and stabilizes the length of the jet, while oxygen decreases the length. The spectral line intensities of OH and Ar atoms decrease with the increase in N2 doping concentration, while the spectral line intensity of nitrogen gas increases. The addition of oxygen reduces the intensity of all the three emission spectra. The electron excitation temperature is the highest in the mixed gas (Ar/N2/O2) and the lowest in pure argon. In the mixed gas (Ar/N2), the vibration temperature and rotation temperature are basically unchanged. After the addition of oxygen, the vibration temperature remained unchanged, but the rotation temperature increased slightly.
28 February 2021 in Surface Engineering
A silica/epoxy hydrophobic coating (water contact angel (WCA) = 130°) was prepared on a glass substrate and further treated in a low-temperature plasma (PL) condition, which surprisingly resulted in an amphiphilic surface (best WCA = 3.5°, best oil CA = 5°) with excellent surface stability and without decay along with the time. We systematically studied the influences of two working gases (O2, Ar) and the working time of PL-treatment on the wetting behaviour (for both water and oil) and the aging effects of the PL-treated silica/epoxy coating, using SEM, FTIR-ATR, XPS and metallographic microscope. The results suggested that the stable super-amphiphilic change, causing by O2 or Ar low-temperature PL-treatment, can be attributed to a physical smoother surface (bombed by PL-treatment) and the surface chemical state change (more polar groups, OH/NH2).
21 December 2022 in IEEE Transactions on Plasma Science
In this article, discharge characteristics and hydrogen peroxide (H $_{2}$ O $_{2})$ generation of multi-needles plate discharge under pulsed power are investigated. By changing the voltage peak value, the pulse repetition frequency, voltage rising edge time, and the number of needles, the change laws of discharge characteristics, molecular emission spectrum, and H $_{2}$ O $_{2}$ concentration are studied. The results show that as the number of needles increases, the discharge power increases. Through the emission spectra showed, the emission spectrum intensity of OH (A $^{2}\sum $ $+ $ $\to $ X $^{2}\prod $ , 0–0, 309 nm) and N $_{2}$ (C $^{3}\prod $ u $\to $ B $^{3}\prod $ g, 0–0, 337 nm) also increases with the number of needles. The changes in the vibrational temperature and rotational temperature of N $_{2}$ molecules show a steady process. As the number of needles increases, the vibrational temperature is 2835–3100 K and the rotational temperature is 342–410 K. They all belong to the low-temperature plasma range. As the number of needles increased, the concentration of H $_{2}$ O $_{2}$ in the solution also increased. The concentration of H $_{2}$ O $_{2}$ in the solution corresponds to the emission spectrum intensities of OH (A $^{2}\sum $ $+ $ $\to $ X $^{2}\prod )$ . When the peak value is 14 kV, the pulse frequency is 1 kHz. The maximum concentration of H $_{2}$ O $_{2}$ reached 15.277 mg/L with 14 needles.
30 April 2024 in IEEE Transactions on Plasma Science
As a method of generating low-temperature plasma, dielectric barrier discharge (DBD) has been applied in many occasions. Traditional DBD has limited application space due to the size of electrode gaps. In this article, a floating-electrode DBD (FE-DBD) structure is designed. The differences in discharge characteristics, spectral characteristics, and water solution treatment effects between FE-DBD and traditional dual electrode DBD are compared. The results show that discharge occurs at both the rising and falling edges of square wave pulses in both structures. However, the discharge current and power under FE-DBD are significantly smaller than DBD. Meanwhile, the ungrounded metal electrode of FE-DB can be equivalent to a large resistor and capacitor in parallel. Based on the circuit analysis and MATLAB/Simulink simulation, the resistance and capacitance values are calculated. The emission spectral intensity of FE-DBD is weaker than that of DBD. Both the vibration temperature and rotation temperature under FE-DBD structure are slightly lower than DBD. In the treatment of sodium indigo disulfonate solution, the processing effect of FE-DBD is weaker than that of DBD under the same time. Its energy efficiency is higher than DBD.
17 December 2024 in IEEE Transactions on Plasma Science
Plasma-assisted catalysts for water treatment have attracted increasing attention due to their high energy efficiency. In this article, graphite phase carbon nitride (g-C $_{{3}}$ N $_{4}$ ) is used as a catalyst for synergistic plasma discharge in water treatment. The discharge characteristics of g-C $_{{3}}$ N $_{{4}}$ , the generation of H $_{2}$ O $_{2}$ , and the changes in the physical and chemical properties of the catalyst before and after discharge have been studied. The results showed that after adding the catalyst, the current and power were slightly lower than those without the catalyst at the same voltage. However, the amount of H $_{2}$ O $_{2}$ produced is about twice that of the original under the same processing time. Furthermore, the physical properties of the catalyst showed a significant increase in the relative surface area of g-C $_{3}$ N $_{4}$ after discharge, while the pore volume of the catalyst also increased. Regarding chemical properties, the oxygen content of g-C $_{3}$ N $_{4}$ continues to increase after discharge, and the ratio of carbon and nitrogen elements also continues to increase. These changes suggest that the plasma generated by the discharge enhanced the catalytic effect of the g-C $_{3}$ N $_{4}$ . Finally, the treatment of the target pollutant shows that the addition of g-C $_{3}$ N $_{4}$ resulted in significantly higher degradation efficiency and energy efficiency compared to the absence of g-C $_{3}$ N $_{4}$ .