26 September 2017 in Materials Technology
Magnesium (Mg) and its alloys posse’s great potential for the application of biodegradable medical implants. It is due to their unique properties like low density and elastic modulus, good biocompatibility, etc. But still there are many challenges for Mg alloy based implants. Due to rapid degradation of Mg and its alloys in biological fluid, it loses its mechanical integrity and fails to perform before the complete healing of bone fracture (in orthopedics application) or removal of plaque in arteries (in case of vascular implants). Using suitable alloying elements mechanical strength and corrosion resistance of Mg-alloys can be enhanced but cytotoxicity and long term inflammatory consequences of these elements are the major concern. Further modifying the surface characteristics of Mg-alloy through various surface coating, machining, mechanical working, etc., corrosion behaviour can be manipulated. In this field of biodegradable implants, the various opportunities are yet to be explored in detail to improve the clinical performance of Mg alloy implants for orthopedics and vascular applications. This review paper summarises the various challenges and opportunities in design and development of biodegradable Mg alloy implants.
1 September 2017 in Journal of Magnesium and Alloys
Porous structures are highly preferred for bone regeneration and high tissue in-growth. In present work, electrical discharge drilling (EDD), a thermal erosion process was used to produce through holes in Mg-alloys to fabricate perforated structure similar to open cell porous structure in extruded AZ31. Apatite formation and weight loss study was conducted for 7 days, 14 days and 21 days after immersion tests in SBF solution. The perforated structure in AZ31 with 26 through micro-holes provides 72% increase in surface area but with marginally 4% higher weight loss as compare to non-perforated structure. Comparing perforated and non-perforated samples of Mg-alloy, it was well observed that perforated structure forms high volume of apatite as compared to non-perforated structure. Scanning electron microscopic (SEM) study revealed that in perforated structure, drilled holes retain their circularity after 21 days of immersion test and distinct corrosion phenomenon occur at localized sites