Copper oxide (CuO) is a p-type semiconductor having a band gap energy of 1.5 eV, which is close to the ideal energy gap of 1.4 eV required for solar cells to allow good solar spectral absorption. The inherent electrical characteristics of CuO nanoparticles make them attractive candidates for improving the performance of polymer solar cells (PSCs) when incorporated in the active polymer layer. The incorporation of CuO nanoparticles in P3HT/PC70BM solar cells at the optimum concentration yields 40.7% improvement in power conversion efficiency (PCE). The CuO nanoparticles in the size range of 100–150 nm have an effective average band gap of 2.07 eV. In addition, the X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analyses show improvement in P3HT crystallinity, and surface analysis by atomic force microscope (AFM) shows an increase in surface roughness of the PSCs. The key factors namely photo-absorption, exciton diffusion, dissociation, charge transport, and charge collection inside the PSCs which affect the external quantum efficiency (EQE) and PCE of these cells are analyzed.
12 November 2015 in Journal of Sustainable Energy Engineering
In this work, thermal annealing is used to optimize the power conversion efficiency of bulk heterojunction P3HT/PC70BM solar cells synthesized by incorporating copper oxide nanoparticles (CuO NPs). Thermal annealing of P3HT/PC70BM thin films was performed at 150° C for 30 minutes. X-ray diffraction and differential scanning calorimetry analysis show an increase in crystallinity in the heat-treated samples. Atomic force microscopic analysis shows an increase in the surface roughness of the active layer after annealing. The increase in surface roughness seems to have improved the space available for P3HT crystallites to self-organize as the crystallinity of the active layer increased after annealing. Ultraviolet-visible and external quantum efficiency spectra indicate an increase in light absorption and charge carriers in the active layer as the crystallinity of the P3HT/PCBM domain increases. After annealing, the power conversion efficiency of P3HT/PC70BM solar cells incorporated with CuO NPs improved by 30% in comparison to the unannealed polymer solar cells.