Agricultural spray drone (ASD) use in managed turfgrass has been given limited attention in the scientific literature. Further, deposition patterns of ASD spray have been obscured in previous research by ambient wind, crop canopy interference, and limited sampling resolution. Using a continuous sampling method involving blue colorant and water sprayed over white Kraft paper that was assessed via digital image analysis of stain objects and referenced spectrophotometric analysis of extractant, deposition metrics were estimated across a 29.3-m transect perpendicular to an ASD or ground-sprayer spray swath. The ASD applies very fine droplets that are highly concentrated with herbicide, similar to ultra–low volume treatments, that improved smooth crabgrass [Digitaria ischaemum (Schreb.) Schreb. ex Muhl.] control compared with a ground sprayer when the ASD was operated 2 m above the turf. Unfortunately, these very fine droplets also drift, leading to four times greater droplet density at distance of almost 12 m away from the targeted spray swath following an operational height of 10 m compared with 2 m. As ASD operational height increases, drift and effective swath width at 30% coefficient of variation uniformity increases, while effective application rate, total deposition, and D. ischaemum control by quinclorac herbicide decreased. Total deposition decreased 6% for each meter increase in ASD operational height, likely due to evaporation. The potential losses due to evaporation are a serious consideration for ASD use that has received little attention in the scientific literature. Our data suggest that ASD operational height should be as low as possible, but modification of spray systems may be needed to improve homogeneity of spray pattern.
The recent decline in pollinator abundance is a cause of concern for sustaining global food production. Several common weeds of managed turfgrass systems attract honeybees and other wild pollinators. As turfgrass often requires treatment with insecticides that harm bees, best practices are needed to prevent bees from visiting weed-infested turf areas that will be treated for insect pests. Weed control tactics can protect pollinator exposure to insecticides by reducing the floral resources afforded to bees from turfgrass weeds. Three field studies were conducted in 2021 and 2022 to evaluate the effect of various herbicides and herbicide formulation constituents on pollinator foraging and white clover floral morphology in managed tall fescue turfgrass. Treatments included a nontreated control; MCPP; 2,4-D; dicamba; Trimec Classic™ (2,4-D, MCPP, dicamba); Speedzone™ (carfentrazone, 2,4-D, MCPP, dicamba); and an herbicide-formulation constituent (inert ingredients of Speedzone™). All response variables were evaluated for 8 d, starting from one day before treatment and ending 6 d after treatment (DAT). The herbicide formulation constituent did not alter white clover flower density, floral discoloration, floral quality, or insect visitation compared to nontreated plots. Herbicides reduced flower density and floral quality to the same extent, but MCPP discolored white clover floral tissue 16% per day and less than all other herbicides except dicamba. Floral quality completely declined in approximately 5 d following any herbicide treatment. Bee visitation to white clover–infested turf increased by 3 bees min–1 for every 100 white clover blooms m–2. Honeybees and other insects vacated herbicide-treated areas in less than 2 d, despite minimal effects on floral quality and density at that time. The data suggest that practitioners could apply insecticides 2 d after auxin herbicide treatment and avoid harm to pollinators, but additional work is needed to directly measure pollinator exposure following such treatments.
28 January 2022 in International Turfgrass Society Research Journal
Allelopathy is a commonly recognized but not fully understood method that could be utilized for weed management. Controlled environment studies in a growth chamber were conducted at Virginia Tech's Glade Road Research Facility in Blacksburg, VA, to determine whether aqueous leaf or root extracts from two Lolium arundinaceum (Schreb) Darbysh (tall fescue) cultivars grown under different growing temperature conditions affected the seed germination and growth of Poa annua L. (annual bluegrass). Two cultivars (‘Falcon III’ and ‘Kentucky 31’) of L. arundinaceum were maintained at cold (day/night 4.4:–1.1°C) or warm (day/night 32.2:26.7°C) conditions for 20 d. Leaf and root extracts were collected via destructive methods and applied to P. annua seed placed in petri dishes. The results indicated that aqueous leaf extracts of L. arundinaceum could inhibit P. annua seed germination, though there was no significant germination reduction with the root extract of L. arundinaceum. The results suggest that temperature may interact with other factors, such as L. arundinaceum cultivar, to influence its allelopathic potency on P. annua seed germination. These results further demonstrate that different cultivars of L. arundinaceum might have different allelopathic effects on P. annua germination.
Spray deposition patterns from agricultural sprayers are traditionally sampled discretely along a field transect accounting for 0.5% or less of the treated area. Such methods may not fully capture the dimensional variability inherent in large‐scale, multiple‐pass spray applications, especially evident from an agricultural spray drone (ASD). This study investigated the utilization of UV‐fluorescent dye and nighttime aerial imaging techniques to assess large‐scale, multipass spray deposition patterns. Accuracy of digital hue from UV‐fluorescent photography to predict deposition of proxy dye was confirmed via fluorometry assessed intensity levels of extracted UV‐fluorescent dye from 384 Petri dishes placed prior to treatment. Results showed that ASD applications, regardless of nozzle type, exhibited greater spatial variability within the target area compared to ride‐on sprayer applications, primarily due to overapplication. Additionally, the ASD generated spray drift to adjacent nontarget areas that was at least three times more than that of ride‐on and spray‐gun sprayers. Multipass deposition was further assessed via in situ smooth crabgrass infestation following treatment with quinclorac or topramezone by multipass ASD or hand‐held, four‐nozzle spray boom. Weed infestation annotated from overlaid grids with 9.3‐dm 2 ground resolution inconsistently detected spatial heterogeneity between transects assessed along the center and edge of each sprayer pass. The ASD controlled smooth crabgrass 11% more than the hand‐held sprayer, albeit with an 18% increase in spray drift to nontarget areas, similar to the UV‐fluorescence study. Digitally assessed average hue of fluorescence photography appears to be a viable method to assess multidimensional and continuous spatial relationships of spray deposition.
Effective pesticide application is dependent on precise and sufficient delivery of active ingredients to targeted pests. Water-sensitive papers (WSPs) have been used to estimate the stain coverage, droplet density, droplet size, total spray volume, and other spray-quality metrics by analyzing deposit stains using image analysis software. However, because WSPs are expensive, they are typically distributed along unidimensional transects at intervals of 0.5 m or more, which comprises 0.5% or less of the total treated area. This might limit the ability to accurately represent the deposition of agricultural sprayers with irregular patterns, such as agricultural drone sprayers in the early developmental stage. This study introduces a novel approach utilizing white Kraft paper and a blue colorant proxy for assessing spray deposition. A custom Python-based image analysis tool, SprayDAT (Spray Droplet Analysis Tool), was developed and compared with traditional image analysis software, DepositScan. Both models showed increased accuracy in detecting larger objects, with SprayDAT generally performing better for smaller droplets. DepositScan underestimated the total deposited spray volume by up to 2.7 times less compared with the colorant extraction assessed via spectrophotometry and the predicted output based on flow rate, coverage, and speed. Accuracy of software-estimated spray volume declined with increasing total stain coverage, likely due to overlapping stain objects. Droplet density exhibited a Gaussian trend, with peak density at approximately 22% stain cover, offering evidence for overlapped stains for both DepositScan and SprayDAT as stain cover increased. Both models showed exponential growth in volumetric median diameter (VMD) with increasing stain cover. SprayDAT is freely accessible through an online repository. It features a user-friendly interface for batch processing large sets of scanned images and offers versatility for customization to meet individual needs, such as adjusting spread factor, updating the standard curve for spray volume estimation, or modifying the stain detection threshold.
22 April 2025 in International Turfgrass Society Research Journal