20 August 2025 in Weed Science
This article aims to further our understanding of the mechanics of physical weed control, specifically the mechanism of using a cutting blade to cut weeds. Research on weed stem cutting is sparse, so this paper draws on examples of plant stem cutting. It reviews the factors that affect the plant stem cutting process. Among the, Cutting speed, blade sharpness, and moisture content, factors that can easily be controlled, are discussed. The indicators for evaluating the cutting process and the methods for measuring the influencing factors are introduced as well. Finally, different blade designs, examples of the application of mechanisms that affect the cutting process of plant stems are provided. This review argues that, under conditions of high cutting speed, high blade sharpness, and high moisture content, plastic deformation would be reduced and the stems would exhibit brittle material characteristics. This would help to reduce the cutting force and energy, but excessive brittleness can cause stem fragmentation and degrade cutting quality. This paper also lists some possible future research directions. First, friction behavior during the cutting process of fresh plant stems. Another, cutting blade design based on the comprehensive application of cutting speed, blade wedge angle, and sliding cutting angle on the cutting process. At present, the mechanism of plant stem cutting process is still not clear. Further research is needed.
17 August 2015 in Transactions of the ASABE
12 November 2025 in Weed Science
To address the complexity and excessive reliance on expert experience in tuning fuzzy proportional-integral-derivative (PID) controller parameters, this study proposes a variable-rate spraying control system that integrates an improved beetle antennae search (IBAS) algorithm with fuzzy PID control. To evaluate the feasibility of the system, a mathematical transfer function of the variable-rate spraying system was constructed, and a flow control simulation platform was established for simulation analysis. The IBAS algorithm was developed to overcome the limitations of conventional BAS, which is prone to premature convergence and limited search precision. The improvements include a hybrid disturbance strategy to enhance individual search capability and a simulated annealing mechanism to prevent the algorithm from being trapped in local optima. Using the IBAS algorithm, the proportional and quantization factors of the fuzzy PID controller were optimized offline to obtain the optimal parameters. The IBAS–fuzzy PID controller was then compared in simulation with conventional PID, fuzzy PID, and BAS-optimized fuzzy PID controllers. The simulation results demonstrated that the IBAS–fuzzy PID algorithm achieved higher flow control accuracy than existing methods. Field experiments were conducted to further validate the effectiveness of the improved algorithm under practical conditions. The results indicated that the IBAS-optimized fuzzy PID controller outperformed the three other control methods in terms of flow control accuracy. Overall, both simulation and field results confirm that the proposed IBAS algorithm for fuzzy PID parameter optimization significantly enhances response speed, control precision, and overshoot reduction, providing a novel approach and potential application for variable-rate spraying technology.