Er:GdScO3 crystal was grown by the edge-defined film-fed (EFG) method for the first time. The rocking curve showed that the as-grown crystal has a high crystalline quality. The peak absorption cross section at 980 nm is 0.38×10−20 cm2 with full width at half maximum (FWHM) of 19.5 nm and the peak emission cross section at 2720 nm is 0.93×10−20 cm2 with FWHM of 149.0 nm. The fluorescence lifetimes of 4I11/2 and 4I13/2 were fitted to be 2.24 ms and 4.57 ms, respectively. At inversion ratio P≥0.5, the positive local peak of gain cross-section at 2.7 µm was obtained. Continuous-wave laser operation of Er:GdScO3 crystal was demonstrated. The maximum output power of 863 mW was obtained with a slope efficiency of 11.25%. The results indicated that Er:GdScO3 crystal is a potential laser material for 2.7 µm laser.
We report on diode-pumped continuous wave and passively Q switched Er:GdScO3 crystal lasers at around 2.8 µm. A continuous wave output power of 579 mW was obtained with a slope efficiency of 16.6%. Using Fe:ZnSe as a saturable absorber, a passively Q switched laser operation was realized. A maximum output power of 32 mW was generated with the shortest pulse duration of 286 ns at a repetition rate of 157.3 kHz, leading to a pulse energy of 204 nJ and a pulse peak power of 0.7 W.
High-quality Cr:LuScO3 crystals were grown by the FZ (floating zone) method. The absorption spectra from 400 nm to 750 nm were tested at room temperature. The absorption cross-sections (σabs) of 0.5at.% and 1at.% Cr3+:LuScO3 were calculated to be 0.70×10−20 cm2 and 0.64×10−20 cm2 at 483 nm corresponding to the 4A2→4T1 transition, and 0.30×10−20 cm2 and 0.27×10−20 cm2 at 661 nm corresponding to the 4A2→4T2 transition, respectively. The transition Cr3+:4T2→4A2 in 1at.% Cr3+:LuScO3 exhibited a broad emission band with the FWHM value reaching up to 297 nm and the emission cross-section (σem) was 2.35×10−20 cm2. From the spectra, the crystal field parameter (Dq) was calculated to be 1513 cm-1, Racah B and C were 544 cm-1 and 3331 cm-1, respectively. All the results indicated the great application potential of Cr3+:LuScO3 crystals in the field of ultrafast lasers.