This study aimed to investigate the fuel properties like density, viscosity and calorific value of trans-esterified methyl ester using castor biodiesel and their blends with No. 2 diesel. Empirical correlations are proposed to predict the kinematic viscosity, density, and calorific value for a mixture of castor oil and No. 2 diesel. Kay mixing rule shows a good prediction for the fuel properties under study. Several polynomials are fitted using least square method, and the fitted equations show a good agreement with the experimental data from our study. The developed equations could be used as universal formulas to predict the kinematic viscosity, density, and calorific value for castor oil and No. 2 diesel blend. The equations can be used to optimize the mixing ratio of the castor oil/No. 2 diesel for different applications. Blending of castor oil with No. 2 diesel- in the range of 20% castor oil, will not violate the required specification of diesel engines
Nanocomposites consisting of multi wall carbon wall carbon nano tubes MWCNT/polyurethane (PU) had been successfully prepared based on hydroxy terminated polybutadiene HTPB and the prepared MWCNT. The effect of concentration of prepared MWCNT and surface modified CNT on the morphology, mechanical reinforcement, and thermal properties of PU-based composites had been evaluated by FESEM, tensile testing, thermo gravimetric analysis TGA and differential scanning calorimeter DSC.Polyurethane (PU) networks based on hydroxyl terminated polybutadiene (HTPB) and isophorone diisocyanate (IPDI) compound were prepared by a batch process. Two methods had been used to fabricate PU matrix/carbon nanotube nanocomposites: direct incorporation of unfunctional CNT (UCNT) into polymer matrices (noncovalent attachment) and in situ polymerization at their surface (covalent attachment).TGA showed a much better improvement of thermal stability of the composites than pure PU. Glass temperature (Tg) increased due to high interaction of CNT with PU. Also Young’s modulus increased. FESEM gave that the covalent attachment was better than noncovalent attachment for preparing PU/CNT composites