11 January 2018 in The International Journal of Advanced Manufacturing Technology
8 November 2018 in Materials Research
In the present work, multi-objective optimization of the input welding parameters influencing the quality of weld joint of AA 5052 H32 aluminium alloy by FSW process is investigated using response surface methodology and grey relational analysis. The quality of the welded joint is measured based on the higher value of tensile strength and hardness of the joint obtained by experimentation. A central composite design technique consists of 31 sets of experiments using four factors and five levels are used. Tool pin profile, rotational speed, welding speed, and tool tilt angle are selected as the significant input parameters. Analysis of variance (ANOVA) is used to analyze the effect of each input welding parameters on the output responses. Statistical results show that the developed regression model is adequate. Optimum levels of welding parameters are finally identified using grey relation grade. Grain structure of the welded joint is examined by observing the micro and macro structures of the weld.
27 June 2011 in Materials and Manufacturing Processes
Welding is one of the major manufacturing processes widely used in all industries because of its inherent properties of joining similar or dissimilar metals efficiently and economically. Residual stresses are inherent, unavoidable detrimental and have significant effect in welded structures. Researchers have developed many techniques to predict welding residual stress. Intelligent tools and techniques have been applied to predict residual stresses to meet the demands of automation in industries. Existing tools are limited in application and needs attention. This research paper addresses the development of finite element model and neurohybrid models for the prediction of residual stress in butt-welding. Residual stress model is developed by the finite element method (FEM). Data sets from FEM model are used to train the developed neuro-based hybrid models such as neural network model trained with genetic algorithm (NNGA), neural network model trained with particle swarm optimization (NNPSO), and neural network model trained with fuzzy system, adaptive neuro fuzzy inference system (ANFIS). Among the developed models, performance of ANFIS model is superior in terms of computational speed and accuracy. Developed models are validated and reported. These developed models find scope in welding shop floor environment to set the initial weld process parameters.
29 March 2013 in Advances in Production Engineering & Management
15 March 2012 in Advances in Production Engineering & Management
30 October 2024 in Natural and Engineering Sciences
Biodiesel is a renewable, locally generated fuel made from vegetable oils, trans fats, or recycled restaurant grease for use in diesel automobiles and other diesel-powered equipment. The physical qualities of biodiesel are comparable to those of petroleum diesel. Biodiesel is used in compression-ignition engines in the same way as petroleum diesel. Biofuel can be made from biomass, but according to the Indian National Policy on Biofuels, biofuel extraction from edible oils is not permitted because it would result in a massive increase in consumer goods prices and perhaps lead to product scarcity. Hence, there is a need to search for alternative biofuel so that it does not affect our nation's national policy. Recently there has been a drastic increase in the consumption of chicken grown in farms. There is a huge problem in disposing of their waste. One major difficulty in waste treatment is poultry manure, often known as slaughter waste. This waste is sometimes dumped on wastelands, roadsides, and the banks of rivers, lakes, and ponds. This creates more sanitary problems for society. According to polls, poultry feces begin to decompose in around three hours. The odor of butcher's waste causes a lot of pollution in the air, as well as an increase in the density of bacteria in the atmosphere. Measures have been taken by the government for the safe disposal of these wastes. One of the major ways of disposal is to recycle this chicken slaughter waste in a useful manner so that it can serve society in a positive way. This could be done by converting this waste into fuel through various processes such as rendering, hydrolysis, extraction, acid esterification, alkaline transesterification, and finally by the extraction process. This produced fuel could be blended with existing diesel in varying concentrations and used in diesel engine-powered vehicles. In this work, the fuel is extracted from the chicken waste and blended with pure diesel and an Al2O3 additive in various proportions. These combinations are then tested on a single-cylinder diesel engine for fuel consumption and emission analysis. The results exhibited an overall better performance when compared to pure diesel.