This article presents the results of the development of membrane-catalytic methods for obtaining purified hydrogen of various degrees of purity required for feeding high-, medium-, and low-temperature fuel cells. In order to conduct this, porous ceramic catalytic converters were obtained using self-propagating high-temperature synthesis. These converters are suitable for high-speed processes for producing synthesis gas with different carbon monoxide content (0.08–0.1 vol. %), which can be used to feed fuel cells of various types. Using a hybrid catalytic membrane reactor, in which the stage of catalytic conversion of organic substrates was combined with the stage of selective extraction of ultrapure hydrogen (content of H2 was not less than 99.9999 vol. %) from the reaction zone, combined carbon dioxide and steam reforming of organic substrates of various origins were carried out. The result of the work was the creation of a prototype of a small-sized electric generator plant in which a catalytic membrane reactor was combined with a solid-oxide fuel cell.
The features of cumene dehydrogenation to α-methylstyrene on unique porous ceramic catalytic converters having the composition [Re,W]/γ-Al2O3(K,Ce)/α-Al2O3 and [Fe,Cr]/γ-Al2O3(K,Ce)/α-Al2O3, obtained using self-propagating high-temperature synthesis and the sol–gel method, have been studied. It has been established that at an optimum temperature of 625°C, the rhenium–tungsten-containing system has approximately 1.5 times higher catalytic activity than the iron–chromium system. On the Re–W-containing catalytic converter at the optimum temperature, the cumene conversion is ~71 mol %, the α-methylstyrene yield is ~77 mol % of theoretical, and the α-methylstyrene content in the products is ~35 mol %, with productivity for the desired product being ~7.4 g/(h gact.comp.). The degree of catalyst coking for 6 h of the experiment did not exceed 5 wt %.