Frank Kenyery

Frank Kenyery

Auto-generated profile, based on publicly available information

Frank Kenyery

Laboratorio de Conversión de Energía Mecánica

Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 October 2011 in International Journal of Rotating Machinery
Verified
Journal Article
Open access
PDF file
JAJesús De Andrade
Jesús De Andrade
CCChristian Curiel
Christian Curiel
FKFrank Kenyery
Frank Kenyery
OAOrlando Aguillón
Orlando Aguillón
AVAuristela Vásquez
Auristela Vásquez
MAMiguel Asuaje
Miguel Asuaje
The paper refers to the numerical analysis of the internal flow in a hydraulic cross-flow turbine type Banki. A 3D-CFD steady state flow simulation has been performed using ANSYS CFX codes. The simulation includes nozzle, runner, shaft, and casing. The turbine has a specific speed of 63 (metric units), an outside runner diameter of 294 mm. Simulations were carried out using a water-air free surface model and k-εturbulence model. The objectives of this study were to analyze the velocity and pressure fields of the cross-flow within the runner and to characterize its performance for different runner speeds. Absolute flow velocity angles are obtained at runner entrance for simulations with and without the runner. Flow recirculation in the runner interblade passages and shocks of the internal cross-flow cause considerable hydraulic losses by which the efficiency of the turbine decreases significantly. The CFD simulations results were compared with experimental data and were consistent with global performance parameters.

5 February 2001
Verified
Conference Paper
Closed access
PDF file
DADelso J. Añez
Delso J. Añez
FKFrank Kenyery
Frank Kenyery
SESharon I. Escalante
Sharon I. Escalante
VTVictor M. Teran
Victor M. Teran
The free gas presence and the viscous fluids managing have been the two most controversial problems that the production engineer has had to face when selecting an ESP system. Growing demand of this method and failures occurred in Venezuelan wells (Orinoco Belt) have stimulated research on existing equipment and technological alternatives. An experimental test with GC-2900 pump was conducted at INTEVEP’s modified facilities. The experimental matrix included tests at different void fraction and pump intake pressure using air, water and mineral oil (375 Cp). Experimental results and analyses pertaining to the behavior of the pump operating at this condition are presented.