Jin Zhang

Jin Zhang

Auto-generated profile, based on publicly available information

Jin Zhang

Department of Electronic Systems, Aalborg University, Aalborg, Denmark

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
JZJin Zhang
Jin Zhang
KZKun Zhao
Kun Zhao
Lei WangLei Wang
Lei Wang
Shuai ZhangShuai Zhang
Shuai Zhang
GPGert F. Pedersen
Gert F. Pedersen
This paper proposes a dual-polarized endfire phased array for 5G handset devices at 28 GHz. The proposed 4-element array has low profile of 1.1 mm, small clearance of 2.7 mm, and symmetric patterns in the vertical plane. The array element is fed by Substrate Integrated Waveguide (SIW), which works as a waveguide (WG) antenna with vertically polarized radiation pattern. Two transition plates are introduced to improve the impedance matching of the WG antenna. The horizontal polarization is generated by exciting one of the transition plate as an antenna. The other transition plate is modified as a group of triangle strips to minimize its reflection to the horizontal radiation patterns. A -10-dB frequency bandwidth of 5.3% and a -6-dB bandwidth of 25% are achieved, overlapping between the vertical and horizontal polarization. The array scanning angle is from -54∘ to 44∘ at 29 GHz for both polarization. Within the scanning range, the endfire gain varies from 7.48 to 8.14 dBi for the horizontal polarization, whereas from 4.49 to 8.05 dBi for the vertical polarization. Good agreements between simulations and measurements are well achieved and shown in this paper.

30 April 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
JZJin Zhang
Jin Zhang
Shuai ZhangShuai Zhang
Shuai Zhang
GPGert F. Pedersen
Gert F. Pedersen
A dual-band structure-reused antenna with quasi-elliptic bandpass feature is proposed in this communication. The antenna consists of a cavity-backed slot array working at $K$ -band (24.2–26.1 GHz) and a frequency selective surface (FSS), which is transparent to the $K$ -band radiation and also reused as a radiator at $S$ -band (2.5–2.7 GHz). The FSS unit cells are designed based on the cross-slot structure. By introducing asymmetric boundaries to each unit cell, the FSS obtains high-frequency selectivity with two transmission zeros located on each side of the passband. The proposed antenna is fabricated and measured. The measurements have a good matching with the simulations.

5 April 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Naser Ojaroudi ParchinNaser Ojaroudi Parchin
Naser Ojaroudi Parchin
JZJin Zhang
Jin Zhang
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
GPGert F. Pedersen
Gert F. Pedersen
Shuai ZhangShuai Zhang
Shuai Zhang
A planar dual-polarized phased array is proposed for 5G cellular communications. The array has the properties of dual-polarization, wideband, and quasi-endfire radiation, which is printed on one side of a single-layer substrate. The design contains two eight-element subarrays including horizontally polarized endfire dipole antennas and vertically polarized endfire periodic slot antennas, employed on the PCB ground plane of the 5G mobile platform. Both subarrays provide wide bandwidth to cover 28 and 38 GHz (promising 5G candidate bands). The −10 dB impedance bandwidth of the proposed CPW-fed dipole and slot antennas are 26.5–39.5 GHz and 27.1–45.5 GHz, respectively. Moreover, for −6-dB impedance bandwidth, these values could be more than 20 GHz (24.4–46.4 GHz for the dipole antenna) and 70 GHz (22.3–95 GHz for the slot antenna). The fundamental characteristics of the proposed dual-polarized 5G antenna array in terms of the impedance bandwidth, realized gain, polarization, radiation pattern, and beam steering are investigated and good results are obtained. The clearance of the proposed dual-polarized 5G antenna array is less than 4.5 mm which is sufficient for cellular applications.

29 December 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Open access
JZJin Zhang
Jin Zhang
Mobayode O. AkinsoluMobayode O. Akinsolu
Mobayode O. Akinsolu
Bo LiuBo Liu
Bo Liu
Shuai ZhangShuai Zhang
Shuai Zhang
In this communication, a substrate integrated waveguide (SIW) end-fire antenna array with zero clearance is proposed for fifth-generation (5G) mobile applications using machine learning-assisted optimization. In particular, a novel impedance matching architecture that involves three arbitrary pad-loading metallic vias is investigated and adopted for the antenna element. Due to the stringent design requirements, the locations and sizes of the vias and pads are obtained via a state-of-the-art machine learning assisted antenna design exploration method, parallel surrogate model-assisted hybrid differential evolution for antenna synthesis (PSADEA). Keeping a very low profile, the array optimized by PSADEA covers an operating frequency bandwidth from 36 to 40 GHz. The in-band total efficiency is generally better than 60% and the peak gain is above 5 dBi. The beam scanning range at 39 GHz covers from −20° to 35°.

31 January 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YSYing Sun
Ying Sun
JZJin Zhang
Jin Zhang
PMPeng Mei
Peng Mei
SLShengyuan Luo
Shengyuan Luo
WFWen Fu
Wen Fu
Shuai ZhangShuai Zhang
Shuai Zhang
This study introduces an innovative tri-band shared aperture antenna (TSAA) array, designed to align with the demands of current base station antennas in facilitating multi-band integration and enabling independent control. Different antenna types are utilized for each operating band, including 3D-printed dielectric resonator antennas (DRAs) for the middle bands (MB, 3.4 to 3.6 GHz) and high bands (HB, 5.4 to 5.6 GHz), and dipole antennas for the low band (LB, 1.85 to 2.15 GHz). The TSAA comprises a 1x4 dipole antenna array for LB, a 2x7 MB antenna array located at the edges of the aperture, and a 2x12 HB antenna array at the aperture center. The LB antenna array is positioned above the HB and MB antenna arrays, providing wideband electromagnetic transparency for both HB and MB simultaneously. By exploiting the high dielectric permittivity of the DRAs, the overall array profile is miniaturized to 0.13 λ 0 (λ 0 represents the free-space wavelength corresponding to the central frequency of LB). At the same time, the spacing of the antenna unit meets scanning conditions for suppressing grating lobes and achieving wide-angle control of each frequency band. Additionally, adopting symmetric η-shaped stripline coupled feeding technology in the LB antenna effectively improves the problem of tilted radiation patterns typically observed in the HB antenna.

10 July 2014 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
JZJin Zhang
Jin Zhang
JDJiangnan Dai
Jiangnan Dai
LZLiqiang Zhu
Liqiang Zhu
CCChangqing Chen
Changqing Chen
QWQing Wan
Qing Wan
Free-standing chitosan membranes with high proton conductivity are prepared by a simple coating-peeling process. Laterally coupled flexible indium-zinc oxide electricdouble-layer transistors with dual in-plane gates are fabricated on such chitosan membranes for the first time. The operation voltage, subthreshold swing, and field-effect mobility are estimated to be 1.0 V, 119 mV/decade, and 1.2 cm 2 /V· s, respectively. Finally, “AND” logic operation is experimentally demonstrated with two in-plane gates as the input terminals. Such free-standing laterally coupled flexible transistors have potential applications in biosensors and biocompatible electronics.