23 August 2012 in IEEE Transactions on Antennas and Propagation
A new microstrip monopolar patch antenna is proposed and analyzed. The antenna has a wide bandwidth and a monopole like radiation pattern. Such antenna is constructed on a circular patch antenna that is shorted concentrically with a set of conductive vias. The antenna is analyzed using a cavity model. The cavity model analysis not only distinguishes each resonating mode and gives a physical insight into each mode of the antenna, but also provides a guideline to design a broadband monopolar patch antenna that utilizes two modes (TM01 and TM02 modes). Both modes provide a monopole like radiation pattern. The proposed antenna has a simple structure with a low profile of 0.024 wavelengths, and yields a wide impedance bandwidth of 18% and a maximum gain of 6 dBi.
3 April 2012 in Proceedings of the IEEE
The objective of this paper is to provide the context, physical insight, and perspective on antennas in wireless communications. Although it does not mean to be comprehensive, the four key technologies related to small antenna designs to be reviewed and discussed, including multiband planar inverted-F antennas, broadband folded patch antennas, compact differentially fed antennas, and miniature circularly polarized patch antennas, would cover a wide range of topical interests and practical applications. A brief overview of computer software for analyzing these antennas is also provided. Hopefully, this paper will be beneficial for the diverse engineering readership of the IEEE.
28 March 2014 in IEEE Antennas and Wireless Propagation Letters
In this letter, a wideband compact circularly polarized (CP) patch antenna is proposed. This patch antenna consists of a printed meandering probe (M-probe) and truncated patches that excite orthogonal resonant modes to generate a wideband CP operation. The stacked patch is employed to further improve the axial-ratio (AR) bandwidth to fit the 5G Wi-Fi application. The proposed antenna achieves 42.3% impedance bandwidth and 16.8% AR bandwidth, respectively. The average gain within the AR bandwidth is 6.6 dBic with less than 0.5 dB variation. This work demonstrates a bandwidth broadening technique of an M-probe fed CP patch antenna. It is the first study to investigate and exhibit the M-probe could also provide the wideband characteristics in the dielectric loaded patch antenna. The potential applications of the antenna are 5G Wi-Fi and satellite communication systems.
14 December 2016 in IEEE Transactions on Antennas and Propagation
Polarization reconfigurable circular patch antenna with a C-shaped slot is proposed in this paper. It is demonstrated that by introducing a reconfigurable C-shaped slot in a circular patch antenna, the polarization of the radiation of the antenna, operating either in a linearly or circularly polarized mode, can be switched effectively. It is switched between vertical and horizontal polarizations for a linearly polarized mode and switched between left hand circularly polarization (LHCP) and right hand circularly polarization (RHCP) for a circularly polarized mode. The polarization reconfigurable characteristic is realized by controlling the states of the two switching diodes mounted over a concentric circular slot incorporated on the patch, so as to vary the orientation of the C-slot. Prototypes of both linear polarization (LP) and circular polarization (CP) designs were developed and the performances were validated against measurements. Both antennas exhibit over 20% impedance bandwidth (SWR<2) and perform broadside radiation over the operating band. The 3-dB axial ratio bandwidth for the circularly polarized case is 4%.
29 April 2013 in IEEE Transactions on Antennas and Propagation
By replacing the metallic patch of a microstrip antenna with a high permittivity thin dielectric slab, a new type of patch antenna, designated as the dense dielectric patch antenna (DD patch antenna), is proposed. At lower microwave frequencies, it has similar performance as the conventional metallic circular microstrip antenna operated in the fundamental TM11 mode. A prototype operated at 3.98 GHz exhibits an impedance bandwidth of 1% and a gain of 5.6 dBi. Due to the absence of the metallic patch, it is expected that this antenna has better radiation efficiency at millimeter wave and terahertz frequencies in comparison with the conventional microstrip patch antenna.
18 December 2014 in IEEE Transactions on Antennas and Propagation
In this communication, a new technique-tapered H-shaped ground, is proposed to reduce the thickness of a magneto-electric (ME) dipole antenna. By employing the proposed technique, the antenna height of the ME dipole antenna is reduced from 0.25 to 0.11 λ0 (where λ0 is the wavelength of 5.5 GHz). This new antenna structure can be easily realized by the multi-layer printed circuit board (PCB) technology, which is low cost and easy to fabricate. Measured results show that this antenna has an impedance bandwidth of 18.74% for VSWR ≤ 2 (4.98 to 6.01 GHz). Stable radiation patterns with low back radiation and low cross polarization radiation are achieved across the entire operating bandwidth for 5G Wi-Fi.