4 July 2019 in Journal of Physics D: Applied Physics
Low temperature plasma treatment of water is being investigated due to its use in pollution abatement, wound treatment and agriculture. Plasma produced reactive oxygen and nitrogen species (RONS) are formed in the gas phase and solvate into the liquid. Activation of the liquid is often limited by transport of these RONS to the liquid surface. Micrometer scale droplets immersed in the plasma have a large surface to volume ratio, which increases the interaction area for a given volume of water, and can increase the rates of transport from the gas to liquid. In this paper, results from 0 and 2D modeling of air-plasma activation of water micro-droplets are discussed. The solvation dynamics are sensitive to the Henry’s law constant ( h ) of each species, which describes its hydrophobicity (low h ) or hydrophilicity (high h ). The liquid densities of stable species with high h values (e.g. H 2 O 2 , HNO
x
) are sensitive to droplet diameter. For large droplets, hydrophilic species may deplete the gas-phase inventory of RONS before liquid-phase saturation is reached, limiting the total in-liquid density for species with high h . For smaller droplets, higher average in-droplet densities of these species can be produced. Liquid concentrations of stable species with low h (e.g. O 3 , N 2 O, H 2 ) had a weak dependence on droplet size as droplets are quickly saturated and solvation does not deplete the gas phase. An analysis of this behavior is discussed using the well-stirred reactor (0D) approximation. Spatial non-uniformity of the plasma also has an impact on the solvation rates and kinetics. Gas phase depletion of high- h species leads to a decrease in solvation rates. Low- h species that saturate the surface of the droplets during plasma-on periods can quickly de-solvate in the afterglow.
22 December 2020 in Journal of Physics D: Applied Physics
Atmospheric-pressure plasmas sustained in packed bed reactors (PBRs) are being investigated for chemical conversion of gases and pollution control. Metallic catalysts added to the surfaces of the dielectric beads of PBRs can increase the energy efficiency and selectivity of chemical processes by reducing operating temperature and providing additional reaction pathways. In this paper, results from a computational investigation of plasma surface interactions between micron-scale metallic catalysts and humid-air plasmas in PBRs are discussed. We found that high plasma density regions form in the proximity of the metallic catalysts. These higher-density plasma regions were confirmed experimentally using ICCD imaging. The intense plasmas result from geometrical electric field enhancement and redistribution of charges within the conductive particles, leading to further enhancement. The high electric field at the triple points of the catalysts can produce electric field emission of electrons, which provides a pre-ionization source or additional source of electrons. These regions of high electric field and sources of electrons guide discharges towards the catalysts and increases fluxes of excited species, ions, electrons and photons to their surfaces. These fluxes are focused primarily at the triple points between the metal, dielectric and gas. As a result, the catalyst is locally heated, which could lead to further increased rates of thermocatalytic reactions on the surface. Surface roughness of the metal inclusions can lead to additional electric field enhancement, which changes the character of the discharges in the vicinity of the catalysts while reducing breakdown voltage.
1 February 2020 in Chemical Engineering Journal
1 November 2022 in Plasma Sources Science and Technology
Atmospheric pressure plasmas intersecting with dielectric surfaces will often transition into surface ionization waves (SIWs). Several applications of these discharges are purposely configured to be SIWs. During propagation of an SIW over a dielectric surface, the plasma charges the surface while responding to changes in geometrical and electrical material properties. This is particularly important for non-planar surfaces where polarization of the dielectric results in local electric field enhancement. In this paper, we discuss results from computational investigations of negative and positive SIWs propagating over nonplanar dielectrics in three configurations—wavy surfaces, cuts through porous materials and water droplets on flat surfaces. We found that negative SIWs are particularly sensitive to the electric field enhancement that occurs at the crests of non-planar surfaces. The local increase in ionization rates by the electric field enhancement can result in the SIW detaching from the surface, which produces non-uniform plasma exposure of the surface. Positive SIWs tend to adhere to the surface to a greater degree. These trends indicate that treatment of pathogen containing droplets on surfaces may be best performed by positive SIWs. The same principles apply to the surfaces cut through pores. Buried pores with small openings to the SIW may be filled by plasma by either flow of plasma into the pore (large opening) or initiated by photoionization (small opening), depending on the size of the opening compared to the Debye length.
1 January 2021 in Plasma Sources Science and Technology
Low temperature plasmas generated inside gas bubbles immersed in water is an effective method of rapidly transferring plasma generated reactive species to the water for applications in biomedicine, agriculture and environment. Reactive species are generally produced in the gas phase plasma and then solvate into the liquid. The large surface-to-volume ratio (SVR) of the bubble accelerates this process. In generating bubbles in water, aerosols and droplets are also contained within the bubble. These droplets also have a large SVR and so can be rapidly plasma activated. However, the presence of the droplets can also impact the propagation of the plasma in the bubble. In this paper, results are discussed from computational and experimental investigations of the formation and evolution of discharges in an air bubble immersed in water with an embedded water droplet. The computations were performed with a two-dimensional plasma hydrodynamics model. Experiments were performed with a quasi-2D bubble apparatus. In bubbles having a droplet, a plasma filament typically bridges from the powered electrode to the droplet, and then from the droplet to the bubble surface. A surface-hugging streamer also occurs on the inner bubble surface and on the surface of the droplet. Both surface streamers result in part from surface charge accumulation and can dominate the formation of reactive species that transport into the droplet. Increasing droplet conductivity suppresses propagation of the surface discharge and leads to a lower density of aqueous reactive species. Increasing conductivity of the surrounding water does not change the overall structure of the discharge but does slightly elevate the discharge intensity. The size and shape of the embedded droplet can significantly affect the formation and propagation of the streamer.
17 December 2019 in Plasma Processes and Polymers