1 August 2018 in Journal of Environmental Chemical Engineering
3 December 2015 in Chemical Engineering & Technology
28 September 2018 in Industrial & Engineering Chemistry Research
Organosolv pulping processes are able to generate liquid hemicellulose fractions with a low cellulose and lignin content. Utilization of such streams is promising for production of high-value chemicals. In this study, on the basis of three reaction models, kinetics of an aqueous organosolv hemicellulose and D-xylose conversion into furfural was examined at temperatures between 160 and 200 °C using a continuous tube reactor. Furthermore, furfural degradation was investigated to consider the self polymerization. Results were compared with previous studies and differences are discussed. Kinetic models showed slight differences for D-xylose conversion and stronger deviations for furfural formation. Overall, model 3, which includes the formation of a xylose intermediate, showed the best performance concerning the experimental results. Differences between D-xylose and organosolv hemicellulose conversion can be attributed mainly to sugar oligomers.
1 October 2015 in Fuel Processing Technology
9 June 2020 in Biomass Conversion and Biorefinery
The aim of this study was the experimental demonstration and assessment of a novel lignocellulose biorefinery (LCB) for the integration of beech wood-based products as platform and fine chemicals. The process sequence included organosolv pulping followed by pulp bleaching, hydrothermal conversion of hemicellulose to xylose and its purification, fermentation of xylose to malic acid, and base-catalyzed lignin depolymerization (BCD). The resulting products were dissolving pulp, phenolic BCD-oligomers, and malic acid. The state of the art for these technologies is their experimental proof of concept and validation at a laboratory- and pilot-scale and has a technology readiness level (TRL) of 3–4. By integrating and optimizing the single-process steps into one LCB, the TRL could be increased to 5. Based on the findings of the experimental studies, a LCB converting 50,000 dry metric tonnes ( $$ \hat{=} $$ 38.7 MW) of beech wood annually was simulated with Aspen Plus. Mass and energy balances showed that 14,616 dry metric tonnes of dissolving pulp, 5174 dry metric tonnes of BCD-oligomers, and 4077 dry metric tonnes of malic acid annually could be produced. The total energy efficiency is 40.3%. The calculation of specific production costs demonstrated the marketability of dissolving pulp (1350 €/t) and BCD-oligomers (2180 €/t), whereas malic acid (4750 €/t) is not yet competitive. Environmental assessment showed reduced greenhouse gas (GHG) emissions from the production of BCD-oligomers and malic acid and higher GHG emissions from the production of dissolving pulp compared with the reference products. In total, the examined LCB would contribute to the mitigation of global warming.
19 June 2019 in ACS Sustainable Chemistry & Engineering