Polybenzoxazoles (PBOs), such as thermally rearranged (TR) polymers, have been shown to have excellent gas separation performance. Herein we report the preparation and transport properties of two new series of PBO-based polymers that were thermally derived from triptycene-containing o-hydroxy polyimide and polyamide precursors via a thermal rearrangement (TR) process and a thermal cyclodehydration (TC) process, respectively. Incorporation of triptycene units into poly(hydroxyimide) precursor structures led to a significant increase of fractional free volume and created ultrafine microporosity in the converted PBO-based TR polymers, which enabled both high gas permeabilities and high selectivities. Although the TC process of the poly(hydroxyamide) precursor led to moderate improvement in the separation performance of the resulting triptycene-containing PBO polymers as compared to the TR process, the PBO films converted via the TC process exhibited excellent mechanical properties superior to many other TR polymers previously reported in the literature as well as the triptycene-containing TR polymers in this study. In particular, the PBO film thermally rearranged at 450 °C showed a H2 pure gas permeability of 810 barrer, a CO2 permeability of 270 barrer, and CO2/CH4 and H2/CH4 selectivities of 67 and 200, respectively, at 35 °C and 11 atm, which are far beyond the upper bound limits.
22 February 2019 in ACS Applied Materials & Interfaces
Discrete metal–organic polyhedra (MOPs) containing copper(II), palladium(II), and iron(II) nodes were synthesized as fillers for mixed-matrix materials (MMMs) with a polyvinylidine fluoride (PVDF) polymer phase and contrasted against an MMM containing a metal–organic framework, MOF-5. When a given MOP was soluble in the precursor solutions, the resulting MMMs were thin, flexible, and homogeneous based on microscopy and SEM imaging. Analogous MMM formation using either insoluble MOPs or the inherent insoluble MOF-5 showed a higher degree of phase separation and inhomogeneity. Even when a MOP was not fully soluble, a significant particle size decrease was observed in contrast to the MOF-5 materials wherein the crystallites remained largely intact. This is a consequence of solubilizing the MOP fillers into the polymer solvent. The crystallinity and thermal stabilities of the MMMs were compared to pure PVDF using powder X-ray diffraction, and differential scanning calorimetry, indicating that the incorporation of MOPs both decreased overall crystallinity as well as increased thermal stability. In addition, MMMs containing PdMOP and FeMOP showed improved gas permeabilities relative to pure PVDF for H2, N2, CH4, and CO2, with the 10 wt% FeMOP membrane more selective for CO2 over N2 and H2.