Accurate switching loss prediction is crucial for studying the failure mechanisms of power modules at extremely high temperatures. However, the temperature range of existing loss models for SiC mosfet s is below 175 $^\circ$ C, which cannot fulfill the requirements of high-temperature applications. This study proposes an analytical switching loss model for SiC mosfet s over an extremely wide temperature range of 25 $^\circ$ C to 475 $^\circ$ C. First, the proposed device-level model improves accuracy by considering the temperature-dependent channel transfer and output characteristics, body diode forward characteristic, and focusing on the two main charge storage effects of the reverse recovery process. Importantly, new phenomena in device characteristics at high temperatures are considered, especially the sudden increase phenomenon in reverse recovery, thereby broadening the applicable temperature range of the model. In addition, the proposed circuit-level model is based on the commonly used four-lead Kelvin source connection case in conventional high-temperature packages and includes almost all parasitic inductances and capacitances. In this study, a low-inductance double-side embedded package structure with a temperature resistance of 550 $^\circ$ C is used to develop a high-temperature double-pulse test platform to verify the accuracy of the model. Experimental results show that the average estimation error of the turn- on energy loss is less than 8% and the maximum estimation error of the total energy loss is less than 14%. The proposed model holds the potential to be a powerful tool for studying extremely high-temperature failure mechanisms of power modules and guides the design of high-temperature converters.
22 February 2023 in IEEE Transactions on Power Electronics
Characterizing package parasitic inductance is significant for package design, dynamic characteristic evaluation, thermal management, and insulation breakdown protection. As package parasitic inductances become smaller and the switching speed of the power semiconductor becomes higher, traditional and widely-used double pulse tests based on the “ L = V /( di / dt )” and “ L = 1/(4π 2 f 2 C )” present more critical drawbacks in accuracy and adaptability. This paper proposes a novel method called objective-based low-frequency-range parasitic inductance characterization to accurately obtain the parasitic inductance of semiconductor packages. The proposed method directly extracts the package inductances instead of the current commutation loop and can be carried out under low bus voltage and low frequency. Thus, the proposed method features higher robustness, adaptability, and accuracy. Experimental results in the commercial SiC power device/module validate the feasibility and superiority of the proposed method.
11 February 2025 in IEEE Transactions on Power Electronics
Accurate online junction temperature ($T_{j}$) extraction is crucial to power mosfets’ reliability and health management. However, most temperature-sensitive electrical parameters in silicon carbide (SiC) power mosfets exhibit relatively low temperature sensitivity, which limits extracting accuracy and increases the bandwidth requirements of measurement circuits. To address these challenges, this article proposes a high-sensitive online $T_{j}$ extracting method, called linear-mode current response (LMCR). A theoretical formula is proposed for the first time to reveal the electrothermal characteristics of the drain current in linear mode. Then, technology computer aided design (TCAD) simulations and experimental results verify its high sensitivity to $T_{j}$ and controllability. To apply for $T_{j}$ extraction, this article details the implementation of the LMCR-based $T_{j}$ extracting unit and strategy. By injecting a narrow current pulse into the device, the $T_{j}\,$can be determined from the LMCR. Calibrations using double pulse test are introduced and demonstrate the method's advantages, including high $T_{j}$ sensitivity, spontaneous injection, minimal additional losses, and low dependence on load current and bus voltage. Finally, the effectiveness of the proposed method is further validated through experiments with a SiC power boost converter. The results show that narrow pulse injection does not affect the load or other components, and this method provides high measurement sensitivity, low invasive interference, and eliminates the need for high-bandwidth circuits.
This paper investigates the thermal performance of silicon carbide (SiC) power device/module in high-temperature environments from two aspects: cooling system and interconnection layer. Based on a double-sided power module with high power density and high operating temperature, experiments and simulations are conducted on the relationship between cooling methods in high-temperature environments and the power capacity of SiC converters. The results show that increasing heat transfer area is an effective way to improve the cooling capacity. With state-of-the-art technology, air-based impinging jet cooling may be the most competitive method in high-temperature applications. For interconnection layers, compared to Semi-sintering nano-silver materials, full-sintering nano-silver materials have become the preferred packaging material for high-temperature applications due to their high thermal conductivity and high melting point. But after simultaneous thermal analysis, the phenomenon of over-sintering at high temperatures may cause reliability issues.
This paper investigates the performance of important factors in applications of silicon carbide (SiC) devices at high temperatures. Cooling and interconnection methods, two of the main factors that affect heat dissipation and reliability, are studied through simulations or experiments. For cooling method, a liquid metal with ceramic heatsink (LMwCH) cooling method is proposed and compared with water-cooled method. The simulation results of them on power die and power module reveal great advantages and potentials of LMwCH cooling method at high temperatures. For nano-silver sintering interconnection technology, the investigation of proper sintering temperature and time is conducted to enhance performance. The micro-patterns of the sintered nano-silver under different sintering processes are observed by scanning electron microscope (SEM), and the results are compared and analyzed.
27 August 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
1 Abstract-The high-temperature capability of power devices is one of the effective ways to enhance the power density of converters. Thermal runaway is an acknowledged issue associated with high-temperature operation, typically occurring in industrial applications of Si power MOSFETs under linear mode operation (LMO). However, the occurrence of this runaway in SiC applications remains unclear. This paper, for the first time, investigates the electrothermal interaction of SiC power MOSFETs in LMO across a wide junction temperature range (25°C to 375°C). A formula describing the electrothermal interaction mechanism of LMO is developed and validated through semiconductor physics simulations and experimental results. Additionally, a comparative study of the device’s high-temperature conversion capabilities, influenced by packaging parameters, is conducted. A control method for thermal sensitivity is also introduced, demonstrating significant potential for high-sensitivity junction temperature detection. This research offers a deeper understanding of the electrothermal interactions of SiC power MOSFETs in LMO across a broad temperature range and provides fundamental insights and guidance for high- and ultra-high-temperature SiC applications.