4 October 2019 in IEEE Antennas and Wireless Propagation Letters
A novel multiband frequency-reconfigurable antenna is presented. The designed antenna can realize L-band single-frequency operation and S-band dual-frequency operation through electronic tuning. Annular ring and sawtooth patches are used as radiators for L/S-band operation and are excited by a broadband reconfigurable orthogonal network through the coupling of a T-shaped slot and a ring slot in the ground plane, respectively. By changing the bias of the p-i-n diodes loaded on the feed network, the operating frequency can be switched between the navigation state and the satellite link receiving state. A high tuning frequency ratio (1.64:1) is obtained. The simulated and measured results show good agreement. Good impedance matching (VSWR < 1.3) and circular polarization characteristics (AR < 3) are obtained in all three operating bands. Achievement of a highly reconfigurable frequency ratio of a circularly polarized antenna provides solutions for multifunction CP antenna aperture sharing.
28 June 2022 in IEEE Antennas and Wireless Propagation Letters
A novel reconfigurable circularly polarized (CP) patch antenna with tunable operation band and switchable polarization states is proposed. Four varactors are placed symmetrically across the cross-shaped slot on the upper square patch so that the operation band of the proposed antenna can be continuously controlled through the specially designed bias. Meanwhile, a triple-branched broadband switchable feed structure loaded with p-i-n diodes is specially designed to achieve polarization reconfigurability (LHCP, RHCP). The structure novelly integrated a 180 $^{\circ }$ broadband phase shifter with a 90 $^{\circ }$ one by a shared reference branch. Simulation results of the feed structure exhibit stable phase-shift in a wide bandwidth of 58.7 $\%$ under $\pm 5^{\circ }$ phase imbalance. A prototype of the antenna is fabricated while both measured and simulated results agree well. The antenna achieves good impedance matching from 2 to 2.7 GHz and the axial ratios at both polarization states are smaller than 3 dB. The frequency and polarization reconfigurability make the antenna potentially suitable for satellite applications, such as multifrequency satellite data link transceiver.
28 June 2021 in IEEE Antennas and Wireless Propagation Letters
A wideband quad-polarization-agility antenna is proposed. The antenna consists of four folded dipoles each integrating with a 1 b phase-reconfigurable balun (PRB). The PRB achieves (0 ° , 90 ° ) or (0 ° , 180 ° ) phase shifting while matching the microstrip feeding networks and the printed dipoles. By switching the p-i-n diodes on the baluns, proper combinations of the signal phases on the four dipoles can be obtained, which generate two orthogonal linear polarizations (LPs) and two orthogonal circular polarizations (CPs). Folding the dipoles broaden the overlapped $-$10 dB impedance bandwidth (BW). Measurement results show that the overlapped impedance BW of the four polarizations is more than 40% (1.4-2.12 GHz). In this band, the antenna radiates a stable pattern, the cross-polarization level of the LP modes is below $-$15 dB and the axial ratios of the CP modes are smaller than 3 dB. Experimental results show good agreement with the simulated results.
6 August 2024 in IEEE Antennas and Wireless Propagation Letters
This letter presents a pattern reconfigurable planar monopole antenna with four channels filled with either air or liquid metal. The innovative design enables transitions between a monopole mode and two directional modes, offering symmetrical radiation patterns across an ultrawideband range. The key lies in its reconfigurable ground plane, which incorporates channels facilitating mode transitions. Without liquid metal (State 0), it functions as a monopole antenna with good impedance matching from 3.4 to 12.5 GHz. Injecting liquid metal into a single channel (State 1 or State 3) forms a reflector, enabling directional radiation in the lower band (2.6–5.5 GHz) with a maximum gain of 5.5 dBi. Filling two adjacent channels (State 2 or State 4) achieves a –10 dB impedance bandwidth from 5.5 to 12.5 GHz with a maximum gain of 8.7 dBi. Radiation patterns can be switched between two opposing directions by injecting liquid metal into left or right channels, making it suitable for ultrawideband wireless devices