25 August 2026 in Aerospace Science and Technology
24 February 2026 in Research Square
In the aerospace applications varying from spacecraft re-entry vehicles to rocket propulsion systems demand robust thermal protection against extreme temperature. Accurate modeling of charring ablation is critical for reliable virtual testing, reducing dependence on costly ground experiments. Previous finite element studies using Arrhenius-based kinetics reproduced surface temperatures reasonably well but consistently overpredicted surface recession, underscoring the sensitivity of predictions to assumed constant parameters. This study presents the first implementation of isoconversional kinetics using the Flynn–Wall–Ozawa (FWO) method for one-dimensional PICA torch test simulation within Abaqus finite element environment. Multi-rate thermogravimetric data were reduced to obtain conversion-dependent activation energy and pre-exponential factors, which were tabulated and embedded into UMATHT. Results show that FWO kinetics improve predictive fidelity by lowering recession errors by 47% (frozen) compared to Arrhenius, while reducing surface temperature by 60–120 K and keeping it within the experimental 2250–2500 K band across 0.6–1.6 kg/(m²·s). However, the temperature profile and the recession rate could not be simultaneously reproduced by a single heat transfer coefficient, highlighting the shortcomings of bulk-pyrolysis kinetics and indicating the need for refined boundary modeling or inclusion of surface chemistry effects. Overall, the FWO framework represents a more realistic upgrade to Arrhenius formulations, reducing conservatism in TPS simulations and improving predictive fidelity in Abaqus.
23 February 2026 in engrXiv
SVSuhail Hyder Vattathurvalappil
Suhail Hyder Vattathurvalappil
Constant-parameter Arrhenius models for phenolic-impregnated carbon ablator (PICA) often match surface temperature, yet systematically overstate char recession. This study implements isoconversion kinetics extracted from multi-rate TGA via Flynn–Wall–Ozawa and embedded in UMATHT for PICA, with tabulated activation energy and pre-exponential factor {E(α), A(α)} advanced at integration points and coupled to conduction, pyrolysis-gas enthalpy, radiative and convective exchange with blowing, and mesh motion. Validation against oxy-acetylene tests shows two main improvements: surface-temperature plateaus remain within the measured 2250–2500 K band while avoiding the Arrhenius overshoot, and mid-range predictions fall by 60–120 K toward the data. Recession bias is reduced by ∼ 39%, from up to fourteen-fold overprediction to ∼ 0.7–3.5× the experimental mean (≈ 0.24 mm s−1). Joint interpretation of temperature history, recession-depth kinetics, and heating-rate fields shows a traveling subsurface maximum that weakens with time and reduces char consumption. Because a single convective coefficient cannot match both temperature and recession, boundary closure limits fidelity.
24 February 2026 in Research Square
SVSuhail Hyder Vattathurvalappil
Suhail Hyder Vattathurvalappil
Constant-parameter Arrhenius models for phenolic-impregnated carbon ablator (PICA) often match surface temperature, yet systematically overstate char recession. This study implements isoconversion kinetics extracted from multi-rate TGA via Flynn–Wall–Ozawa and embedded in UMATHT for PICA, with tabulated activation energy and pre-exponential factor {E(α), A(α)} advanced at integration points and coupled to conduction, pyrolysis-gas enthalpy, radiative and convective exchange with blowing, and mesh motion. Validation against oxy-acetylene tests shows two main improvements: surface-temperature plateaus remain within the measured 2250–2500 K band while avoiding the Arrhenius overshoot, and mid-range predictions fall by 60–120 K toward the data. Recession bias is reduced by ∼ 39%, from up to fourteen-fold overprediction to ∼ 0.7–3.5× the experimental mean (≈ 0.24 mm s−1). Joint interpretation of temperature history, recession-depth kinetics, and heating-rate fields shows a traveling subsurface maximum that weakens with time and reduces char consumption. Because a single convective coefficient cannot match both temperature and recession, boundary closure limits fidelity.