19 November 2020 in Lab on a Chip
A microfluidic device to quantitate antibody reactivities to SARS-CoV-2 antigens: spike protein, RDB, S1 subunit, and nucleocapsid, from 50 serum samples.
28 July 2022 in Electrophoresis
RRRoberto Rodriguez‐Moncayo
Roberto Rodriguez‐Moncayo
DCDiana F. Cedillo‐Alcantar
Diana F. Cedillo‐Alcantar
PGPablo E. Guevara‐Pantoja
JAJosue U. Amador‐Hernandez
Josue U. Amador‐Hernandez
15 April 2024 in Lab on a Chip
AGAlan M. Gonzalez-Suarez
JMJose L. Maravillas-Montero
Jose L. Maravillas-Montero
Leukocyte count is routinely performed for diagnostic purposes and is rapidly emerging as a significant biomarker for a wide array of diseases. Additionally, leukocytes have demonstrated considerable promise in novel cell-based immunotherapies. However, the direct retrieval of leukocytes from whole blood is a significant challenge due to their low abundance compared to erythrocytes. Here, we introduce a microfluidic-based platform that isolates and recovers leukocytes from diluted whole blood in a single step. Our platform utilizes a novel, sheathless method to initially sediment and focus blood cells into a dense stream while flowing through a tubing before entering the microfluidic device. A hexagonal-shaped structure, patterned at the device's inlet, directs all the blood cells against the channel's outer walls. The focused cells are then separated based on their size using the deterministic lateral displacement (DLD) microfluidic technique. We evaluated various parameters that could influence leukocyte separation, including different focusing structures (assessed both computationally and experimentally), the orientation of the tubing-chip interface, the effects of blood sample hematocrit (dilution), and flow rate. Our device demonstrated the ability to isolate leukocytes from diluted blood with a separation efficiency of 100%, a recovery rate of 76%, and a purity of 80%, while maintaining a cell viability of 98%. The device operates for over 30 min at a flow rate of 2 μL min−1. Furthermore, we developed a handheld pressure controller to drive fluid flow, enhancing the operability of our platform outside of central laboratories and enabling near-patient testing. Our platform can be integrated with downstream cell-based assays and analytical methods that require high leukocyte purity (80%), ranging from cell counting to diagnostics and cell culture applications.
17 July 2020 in Lab on a Chip
ASAlberto M. Solis-Serrano
We present a simple and low-cost positioner fixture to improve the fabrication resolution of acrylic microchannels using conventional milling machines. The positioner fixture is a mechatronic platform that consists of three piezoelectric actuators assembled in a housing made of 3D printer parts. The upper part of the housing is raised by the simultaneous actuation of the piezoelectric elements and by the deformation of 3D-printed hinge-shaped supports. The vertical positioning (Z-axis) can be controlled with a resolution of 500 nm and an accuracy of ±1.5 μm; in contrast, conventional milling machines can achieve resolutions of 10 to 35 μm. Through simulations, we found that 3D-printed hinges can deform to reach heights up to 27 μm without suffering any mechanical or structural damage. To demonstrate the capabilities of our fixture, we fabricated microfluidic devices with three weir filters that selectively capture microbeads of 3, 6 and 10 μm. We used a similar weir filter design to implement a bead-based immunoassay. Our positioner fixture increases the resolution of conventional milling machines, thus enabling the fast and easy fabrication of thermoplastic fluidic devices that require finer microstructures in their design.
20 November 2022 in Advanced Materials Technologies
9 June 2025 in Lab on a Chip
Parallel DLD arrays allow rapid, scalable chloroplast isolation with improved size resolution and separation efficiency.