This paper describes a new application of holographic radar for non-destructive testing applied to cultural heritage items. A holographic radar, called RASCAN, operates in continuous wave multi-frequency mode at 4 GHz range and produces images with high in-plane resolution (about 2 cm). Marble items and other stones have been investigated to validate the method to search for subtle cracks, moisture or to unveil details of structures at shallow depth (up to 2 wavelengths). Other important materials are aged wood items that are investigated for tunnels made by insects. Then the holographic radar imaging has been experimentally compared with infrared thermography to understand the advantages and disadvantages of these methods and to derive indications for solving the problem common in all geophysics of inherent non-uniqueness.
11 September 2019 in Journal of Electromagnetic Waves and Applications
In many cryogenic systems, during useful life, defects or degradation of performance are found. Frequently these malfunctions are due to the presence of alterations in the characteristics of the thermal insulating materials used to coat the metal parts of the system. It is useful to evaluate methods for investigating the quality of insulating coatings by means of instruments, with low cost, that can be easily used during production. Thermal insulating materials are characterized by a relative dielectric constant close to the unit and a low Loss Factor: this work aims to investigate the use of microwave holographic radar for the detection of defects in such materials. The results show good detectability of defects when they are oriented as the antenna axis. Finally, it is shown that the robotic scan can examine large areas with the same detection performances of manual scan but with less set up and scanning time.
9 October 2025 in IEEE Transactions on Geoscience and Remote Sensing
We provide experimental results of an investigation into the detectability of small low-metal-content landmines using multiple sensors in field conditions. The sensors tested were an impulse ground penetrating radar, a metal detector, and a holographic subsurface radar. By using the combined sensors, we were able to reliably detect the presence of both M14 and Type 72 landmines buried at shallow depths in damp soil. The sensors were mounted on a remotely-operated robotic platform, which provides enhanced safety in real minefield conditions. The results indicate that this combination of sensors could provide an effective method for safely identifying the presence of minimum metal landmines in real post-conflict zones. Such mines are not currently detectable with unmanned aerial vehicles, so this ground-based approach is complementary.