In organic thin‐film transistors (TFTs) fabricated in the inverted (bottom‐gate) device structure, the surface roughness of the gate dielectric onto which the organic‐semiconductor layer is deposited is expected to have a significant effect on the TFT characteristics. To quantitatively evaluate this effect, a method to tune the surface roughness of a gate dielectric consisting of a thin layer of aluminum oxide and an alkylphosphonic acid self‐assembled monolayer over a wide range by controlling a single process parameter, namely the substrate temperature during the deposition of the aluminum gate electrodes, is developed. All other process parameters remain constant in the experiments, so that any differences observed in the TFT performance can be confidently ascribed to effects related to the difference in the gate‐dielectric surface roughness. It is found that an increase in surface roughness leads to a significant decrease in the effective charge‐carrier mobility and an increase in the subthreshold swing. It is shown that a larger gate‐dielectric surface roughness leads to a larger density of grain boundaries in the semiconductor layer, which in turn produces a larger density of localized trap states in the semiconductor.
We analyze the impact of the first order structural phase transition between the α- and β-phases in crystalline zinc-phthalocyanine thin films on their luminescent behavior. Upon optical excitation, two intensity maxima governing the dual fluorescence can be attributed to thin film excimer emission of the α-phase at 930 nm and bulk Frenkel exciton emission of the corresponding β-phase at 780 nm. Comprehensive temperature and time dependent studies on the structural phase transition reveal a controllable shift of spectral weight between these two maxima. Applying this approach to thin film devices, we demonstrate the preparation of dual luminescent organic light emitting diodes with tunable emission characteristics in the near infrared, which are of interest as electro-optical units in future hybrid photonic devices.
30 December 2019 in ACS Applied Electronic Materials