Domains in the low-temperature, ferrimagnetic, and ferroelectric, phase of magnetite were investigated in the bulk, via their ferroelastic distortion, by means of synchrotron radiation x-ray topography, complemented by Nomarski optical microscopy on the surface. After cooling through the Verwey transition under a magnetic field parallel to [001], the images show a hierarchy of domains. Domains associated with a small difference in lattice distortion provide a clear indication that the symmetry is triclinic. They appear as a substructure of monoclinic domains separated by walls creating no long-range stress. The domain structure deduced from the observation, under the experimentally self-tested assumption that the walls involved are stress free, is favorable from the elastic, magnetostatic, and electrostatic points of view.
Surface acoustic waves (SAWs) are excited on the GaAs (001) surface by using interdigital transducers, designed for frequencies of up to 900 MHz. The emitted phonons with wavelengths down to 3.5 μm are visualized and characterized by combined x-ray diffraction techniques. Using stroboscopic topography, the SAW emission of a parallel and a focusing transducer geometry are imaged. High-resolution x-ray diffraction profiles show up to 12 phonon-induced satellite reflections besides the GaAs (004) reflection, with a width of 9 arcsec each. The diffraction pattern is simulated numerically, applying the kinematical scattering theory to a model crystal. From fits to measured diffraction profiles at different excitation voltages, the SAW amplitudes were calculated and found to be in the sub-nm range.
29 March 2017 in Journal of Applied Crystallography
Bragg diffraction imaging enables the quality of synthetic single-crystal diamond substrates and their overgrown, mostly doped, diamond layers to be characterized. This is very important for improving diamond-based devices produced for X-ray optics and power electronics applications. The usual first step for this characterization is white-beam X-ray diffraction topography, which is a simple and fast method to identify the extended defects (dislocations, growth sectors, boundaries, stacking faults, overall curvatureetc.) within the crystal. This allows easy and quick comparison of the crystal quality of diamond plates available from various commercial suppliers. When needed, rocking curve imaging (RCI) is also employed, which is the quantitative counterpart of monochromatic Bragg diffraction imaging. RCI enables the local determination of both the effective misorientation, which results from lattice parameter variation and the local lattice tilt, and the local Bragg position. Maps derived from these parameters are used to measure the magnitude of the distortions associated with polishing damage and the depth of this damage within the volume of the crystal. For overgrown layers, these maps also reveal the distortion induced by the incorporation of impurities such as boron, or the lattice parameter variations associated with the presence of growth-incorporated nitrogen. These techniques are described, and their capabilities for studying the quality of diamond substrates and overgrown layers, and the surface damage caused by mechanical polishing, are illustrated by examples.
The structure of real icosahedral quasicrystals of the Al-Pd-Mn system can be described in terms of a hierarchical self-similar packing of overlapping atomic clusters. An inflation scale factor tau 3 preserves long-range order but generates a hierarchy of holes and a fractal structure. Such holes have actually been observed and they might be of basic importance in the growth mechanism and stability of quasicrystals.
Synchrotron radiation topography on modern sources, coupled with adequate CCD detectors, is producing (in a shorter time and with better resolution) results which could only be obtained, up to now, by using neutron topography. This is shown by two examples, carried out at the ESRF, on `exotic' antiferromagnetic domains: (1) the imaging of 180° antiferromagnetic domains in cobalt fluoride is performed using the inverse piezomagnetic effect: the action of a magnetic field while cooling and `memory' effects are investigated in this way, and (2) the spin density wave domains in chromium are observed using their associated, weak, charge density wave peaks: the importance of the surface effects to determine the domain type is evidenced.