25 March 2024 in IEEE Transactions on Robotics
This paper investigates one of the most challenging tasks in dynamic manipulation-catching large-momentum moving objects. Beyond the realm of quasi-static manipulation, dealing with highly dynamic objects can significantly improve the robot's capability of interacting with its surrounding environment. Yet, the inevitable motion mismatch between the fast moving object and the approaching robot will result in large impulsive forces, which lead to the unstable contacts and irreversible damage to both the object and the robot. To address the above problems, we propose an online optimization framework to: 1) estimate and predict the linear and angular motion of the object; 2) search and select the optimal contact locations across every surface of the object to mitigate impact through sequential quadratic programming (SQP); 3) simultaneously optimize the end-effector motion, stiffness, and contact force for both robots using multi-mode trajectory optimization (MMTO); and 4) realise the impact-aware catching motion on the compliant robotic system based on indirect force controller. We validate the impulse distribution, contact selection, and impactaware MMTO algorithms in simulation and demonstrate the benefits of the proposed framework in real-world experiments including catching large-momentum moving objects with welldefined motion, constrained motion and free-flying motion.
21 June 2018 in IEEE Robotics and Automation Letters
In this letter we present a control and trajectory tracking approach for wiping the train cab front panels, using a velocity controlled robotic manipulator and a force/torque sensor attached to its end effector, without using any surface model or vision-based surface detection. The control strategy consists in a simultaneous position and force controller, adapted from the operational space formulation, that aligns the cleaning tool with the surface normal, maintaining a set-point normal force, while simultaneously moving along the surface. The trajectory tracking strategy consists in specifying and tracking a two dimensional path that, when projected onto the train surface, corresponds to the desired pattern of motion. We first validated our approach using the Baxter robot to wipe a highly curved surface with both a spiral and a raster scan motion patterns. Finally, we implemented the same approach in a scaled robot prototype, specifically designed by ourselves to wipe a 1/8 scaled version of a train cab front, using a raster scan pattern.
1 January 2017 in Procedia CIRP