Electrical and Computer Engineering Program, Computer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division, King Abdullah University of Science and Technology (KAUST), Thuwal, Saudi Arabia
Auto-generated profile, based on publicly available information
Yiming Yang
Electrical and Computer Engineering Program, Computer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division, King Abdullah University of Science and Technology (KAUST), Thuwal, Saudi Arabia
Despite the growing interest in reconfigurable intelligent surfaces (RISs) for millimeter-wave (mm-wave) bands, and the considerable theoretical work reported by the communication community, there is a limited number of published works demonstrating practical implementations and experimental results. To the authors’ knowledge, no published literature has reported experimental results for RISs covering the n257 and n258 mm-wave bands. In this work, we propose a novel wideband RIS design that covers the entire mm-wave 5G n257 and n258 bands. In simulations, the unit cell can maintain a phase difference of 180° ± 20° and a reflection magnitude greater than -2.8 dB within 22.7 to 30.5 GHz (29.3% bandwidth) using one-bit PIN switches. The proposed unit cell design with four circular cutouts and long vias could realize wideband performance by exciting two adjacent high-order resonances (2.5 f and 3.5 f ). The periodic unit cells can maintain an angular stability of ± 30°. Based on the proposed unit cell, a 20×20 RIS array is designed and fabricated with a size of 7.1λ×7.1λ. The measurement results demonstrate that the proposed RIS could maintain a 3 dB peak gain variation bandwidth among various array configurations within 22.5 to 29.5 GHz (26.9%) and with a beam scanning capability of 50°, making this design a good candidate for 5G mm-wave applications.
27 October 2020 in IEEE Transactions on Antennas and Propagation
This paper proposes a single-layer, dual-band, optically transparent frequency selective surface (FSS) for GSM shielding. The design evolves from a fractal cross dipole to achieve dual band response, polarization insensitivity and wide angle of incidence stability with a miniaturized size. A two-axis symmetric structure helps to provide a stable frequency response for incident waves with different polarization angles up to 60°. Capacitive loading further reduces the unit size and extends the maximum stable incident angle. The working mechanism of the design has been explained through an equivalent lumped element circuit model (ECM), which provides a generic approach to retune or optimize the design for another frequency band. Both the full-wave EM and circuit simulations are in good agreement. A prototype has been realized by screen-printing a custom silver nanowires (Ag NWs) based transparent ink on a flexible polymer substrate. A decent reflection performance has been achieved from 0.71 to 1.25 GHz and from 1.73 to 2.16 GHz in measurements, which are consistent with the simulations. Optical measurements reveal a transparency of 81.6%. Printed FSS is completely flexible and the performance does not deteriorate after bent or rolled up conditions. Field testing on a glass box demonstrate decent shielding from the incoming GSM signals. The highly transparent and flexible nature of the FSS structure makes it suitable for mounting on glass windows of cars or home environments for EM shielding purposes.
24 October 2025 in IEEE Journal on Selected Areas in Communications
This paper presents the concept, design, channel modeling, beamforming algorithm development, prototype fabrication, and experimental measurement of an electromagnetically reconfigurable fluid antenna system (ER-FAS), in which each FAS array element features electromagnetic (EM) reconfigurability. Unlike most existing FAS works that investigate spatial reconfigurability by adjusting the position and/or orientation of array elements, the proposed ER-FAS enables direct control over the EM characteristics of each element, allowing for dynamic radiation pattern reconfigurability. Specifically, a novel ER-FAS architecture leveraging software-controlled fluidics is proposed, and corresponding wireless channel models are established. Based on this ER-FAS channel model, a low-complexity greedy beamforming algorithm is developed to jointly optimize the analog phase shift and the radiation state of each array element. The accuracy of the ER-FAS channel model and the effectiveness of the beamforming algorithm are validated through (i) full-wave EM simulations and (ii) numerical spectral efficiency evaluations. These results confirm that the proposed ER-FAS significantly enhances spectral efficiency in both near-field and far-field scenarios compared to conventional antenna arrays. To further validate this design, we fabricate prototypes for both the ER-FAS element and array, using Galinstan liquid metal alloy, fluid silver paste, and software-controlled fluidic channels. The simulation results are experimentally validated through prototype measurements conducted in an anechoic chamber. Additionally, several indoor communication experiments using a pair of software-defined radios demonstrate the superior received power and bit error rate performance of the ER-FAS prototype. This paper offers a comprehensive demonstration of a liquid-based ER-FAS array for wireless communication, incorporating a novel electromagnetically reconfigurable design, channel modeling, and beamforming, supported by simulation, hardware implementation, and experimental validation.
18 March 2025 in IEEE Transactions on Microwave Theory and Techniques
Reconfigurable intelligent surfaces (RISs) suffer from high switch costs and complex switch integration with electromagnetic (EM) structures. In this article, we propose solutions to both of the abovementioned problems by screen printing of low-cost vanadium-dioxide (VO2) switches. The VO2 ink has been prepared in-house and batches of switches have been printed and integrated with the resonator elements. Screen printing is suitable for low-cost and large-area manufacturing, and thus, these VO2 switches are a fraction of the cost of commercial switches. Furthermore, the printing of these switches directly on metal patterns negates the need for any minute soldering of the switches. To avoid the complications of multilayer printing and realizing the RIS without vias, the resonators and the biasing lines are realized on a single layer. However, this introduces the challenge of interference between the biasing lines and the resonators. We address this by integrating bias lines into the resonator design. By adjusting the unit cell periodicity and the dimension of the H-shaped resonator, we achieve a 220∘–170∘ phase shift from 23.5 to 29.5 GHz covering both 5G n257 and n258 bands. Inside the wide bandwidth, the maximum reflection magnitude in the on state is 74% and is 94% in the off state. The RIS array comprises 20 × 20 unit cells (4.54λ2 × 4.54λ2 at 29.5 GHz). Each column of unit cells is serially connected to a current biasing circuit. To validate the array’s performance, we conduct full-wave simulations as well as near-and far-field measurements. The fully printed array shows signal enhancements of around 8–10 dB, validating its effectiveness.
4 September 2025 in IEEE Transactions on Antennas and Propagation
Reconfigurable intelligent surface (RIS) with 1-bit phase resolution suffers from high side lobe levels (SLLs) in the near field and pronounced quantization lobe levels (QLLs) in the far field, which is detrimental for the quality of wireless communication. RIS design is further challenging in the mm-Wave bands, where typically large bandwidths are required. To address these limitations, this work proposes a novel wideband 5G mm-Wave RIS with 2-bit phase quantization, capable of covering the entire 5G n258 band. The proposed unit cell design is a combination of a grounded main slot, a parasitic slot, and a coupling patch, utilizing only two PIN diodes. This design achieves a 2-bit bandwidth (BW) of 24.1–27.7 GHz (13.9%) and an effective 1-bit BW of 20.0–28.9 GHz (36.4%). The unit cell features a compact size of 0.39λ × 0.39λ, providing decent angular stability of ±30° as well as eliminating the grating lobes. Based on this unit cell design, a 20 × 20 RIS array has been designed, fabricated and experimentally characterized. The measured results demonstrate that, within the 5G n258 band, the proposed 2-bit 5G mm-Wave RIS achieves an SLL of -15.4 dB in the near field, representing a 7.6 dB improvement compared to its 1-bit counterpart. Furthermore, it has almost negligible QLL (-14.6 dB) in the far field, providing a suppression of 13.3 dB relative to the 1-bit design. Thus, the proposed 2-bit mm-Wave RIS offers wideband performance, low SLL, negligible QLL, decent angular stability, and a broad beam scanning range of 50°, making it a promising solution for high-resolution and low-interference mm-Wave wireless communication systems.
22 September 2025 in IEEE Communications Standards Magazine
Reconfigurable Intelligent Surfaces (RIS) have emerged as an innovative technology for enhancing signal reception by manipulating the channel state and enabling passive beamforming toward targeted directions. Nonetheless, the effective deployment of RIS relies on precise phase shift optimization, a challenge exacerbated by restricted computational resources and the need for accurate channel state information. In this context, predefined codebooks and RIS partitioning deployment offer strategic solutions, enabling the RIS to serve multiple users simultaneously by assigning different partitions to various tasks and selecting the optimal codeword for specific objectives. As efforts to standardize RIS, this article presents an experimental testbed developed to assess the impact of RIS partitioning in the millimeter-wave band across several scenarios, including enhancing data rates in grant-free non-orthogonal multiple access, managing interference in heterogeneous networks, and maximizing secrecy capacity in physical layer security contexts. By investigating these case studies, this article provides empirical insights into the versatility and effectiveness of RIS partitioning across various communication environments. The research concludes by discussing the crucial challenges in RIS hardware design and implementation, emphasizing innovative pathways for advancing RIS technology in wireless infrastructures.