Aqra Anticline is a double plunging anticline, oriented NW–SE with a steep southwestern limb and even overturned. Geomorphological features are interpreted using satellite images, as a result, it was found that the anticline shows clear geomorphological and structural features which indicate the lateral growth of the anticline. Among those features are water gaps, wind gaps, forked-shaped valleys, curved valleys, inclined valleys and dislocated and abandoned alluvial fans. Some of the vague interpreted features were checked and confirmed in the field.
3 December 2017 in UKH Journal of Science and Engineering
Khabbaz oilfield has a symmetrical subsurface anticline with a length of 20 km and a width of 4 km. Despite the fact that Khabbaz oilfield has a small size structure, it is known as one of the massive Oilfields in Iraq. The reservoirs of Khabbaz oilfield are produced by both Cretaceous and Tertiary rocks. The Upper Qamchuqa reservoir is the most productive reservoir of the Khabbaz oilfield with thickness ranges between 138 to 170 m. This formation is subdivided into two units, from the top is Unit A with a thickness of 67 m and from the bottom is Unit B with a thickness of 84.5 m. From a full set of log data of three wells (Kz-1, Kz-13 and Kz-14), the petrophysical properties of Khabbaz oilfield has been evaluated. The wireline log data includes gamma-ray log, sonic log, neutron log, density log and resistivity logs, both Rxo and Rt logs. This study revealed that Unit A represents the best reservoir characteristics where Unit A is subdivided into six reservoir subunits named (1-A, 2-A, 3-A, 4-A, 5-A and 6-A). They are separated by five non-reservoir subunits named 1-N, 2-N, 3-N, 4-N and 5-N. In addition to a less porous reservoir unit that is called Unit B, which has been divided into four reservoir subunits named 1-B, 2-B, 3-B and 4-B. These are separated by five non-reservoir units named 1-N, 2-N, 3-N, 4-N and 5-N. It has been recognized that both reservoir units A and B are clean formations and have minimum shale volume with high porosity in limestone and dolomite to dolomitic limestone lithology with high oil saturation and low water saturation. Based on the above reservoir characteristics it can be concluded that the reservoir units of the Khabbaz oilfield contain a massive commercial hydrocarbon accumulation.
30 December 2020 in UKH Journal of Science and Engineering
Gara and Mateen are 2 major anticlines in the northern part of the Iraqi Kurdistan Region, located in the vicinity of the town Amadiyah. Both anticlines are oriented in an almost east–west (E–W) trend with a steep southern limb. The length and width of the Gara and Mateen anticlines are 87 km and 63 km, and 11 km and 9.5 km, respectively. The 2 anticlines are separated by a wide and shallow syncline filled by the Tertiary rocks of the Pliocene–Pleistocene age. The oldest exposed rocks in the Gara and Mateen anticlines are from the Triassic age. The carapace of both anticlines is built up by the Bekhme and Qamchuqa formations. The geomorphological and structural features were studied through satellite images and geological maps. Based on these studies, it was found that both anticlines show clear geomorphological and structural features that indicate their lateral growth. Among those features are water and wind gaps, different shapes of valleys that indicate lateral growth, abandoned alluvial fans, whale-back shapes, en-echelon plunges, and multiple dome anticlines. Furthermore, the rate of upward movements was calculated using neotectonic data. In addition, the rate of river and stream incisions was calculated on the basis of the height of the river terrace levels.
Handreen, Zozik and Tanoun are three major anticlines in the northern part of Iraqi Kurdistan Region located NE of Rawandouz town. All anticlines are oriented NW-SE with a steep southwestern limb. The length and width of Handreen, Zozik and Tanoun anticlines are 20.2 km, 23 km, 27 km, and 10 km, 4.7 km and 2.5 km, respectively. The anticlines are separated by very narrow synclines. However, Tanoun anticline is thrusted over Zozik anticline causing the disappearance of the synclinal axis between the two folds. The oldest exposed rocks in Handreen anticline are the Cretaceous age, in Zozik anticline are the Upper Jurassic rocks, whereas in Tanoun anticline, the Lower Jurassic rocks are exposed. The carapace of Handreen and Zozik anticlines is built up by Bekhme and Qamchuqa formations and that of Tanoun anticline by the Qamchuqa Formation. Satellite images and geological maps were used to recognize the geomorphological and structural features which were checked and confirmed in the field. Handreen, Zozik and Tanoun anticlines show clear geomorphological and structural features which indicate their lateral growth. Among those features are water gaps, wind gaps, forked-shaped valleys, curved valleys, inclined (curved) valleys, radial valleys, abandoned alluvial fans, wale-back shape, en-echelon folds and folds with malty domes.
The structural forms (folds and faults) in the Iraqi Kurdistan Region exhibit more complexity in the northern and northeastern parts of the region; accordingly, complicated geomorphic forms were developed too. This is attributed to the collision of the Arabian and Eurasian plates with a convergent boundary that runs about 35 – 40 km northeast of the studied area. Many long and tight anticlines exist in the studied area, the majority of them exhibit very complex forms, such as being faulted and their axes being bent. The main characteristic structural and Geomorphic recognized forms based on the interpretation of high-quality satellite images are: Domes, en-echelon plunges, overturned beds, faulted anticlinal and synclinal axes, abandoned and recent alluvial fans, water and wind gaps, wine glasses, different valley shapes. The recognized structural forms are quite different from those previously presented on the geological maps of different scales, and the forms are good indications for the lateral growth of the anticlines. A field check was carried out to check some ambiguous interpreted data and to confirm the new findings.
Many geological formations are exposed in the Pira Magroon anticline (Mountain); in the northeastern part of the Kurdistan Region, Iraq. The components of the exposed formations are carbonate rocks, especially limestone, which might be utilized for different industrial uses. To have an industrial assessment for the exposed limestone beds in the Pira Magroon anticline, Zewe Gorge has been chosen for sampling, where the Shiranish and Kometan formations are exposed in the outlet of the gorge. Eleven samples have been collected within the Shiranish and Kometan Formations starting from the bottom of the Kometan Formation, with different sampling intervals. Thereafter, the samples were prepared to be tested by XRF machine; in order to show the concentrations of the main oxides in the collected samples. The weighted averages were calculated from the concentrations of the oxides, and then the averages were indicated. Accordingly, the data were compared with the Iraqi and other industrial standards, to know the usage of the tested rocks for different industries. The acquired data showed that the carbonate successions of the Kometan and Shiranish Formations of the Zewe Gorge in the Pira Magroon Anticline can be used in cement