The temperature of axial flux motor components directly affects the performance of machine. The cooling design for the rotor is obviously difficult because of its inherent rotation characteristic. A rotor air-cooling enhanced method for axial flux machines with housing-cooling is proposed in this article. In order to improve the air-cooling performance of the rotor, tile-shaped fins are mounted to the inner wall of the housing taking into account the fluid flow characteristics of axial flux motors in a cavity. The impact of the key parameters on the thermal performance are investigated by the theoretical analysis and computational fluid dynamics. In addition, the thermal model of the tile-shaped fin is derived, and the thermal network of the rotor is constructed accordingly. Finally, two prototype motors are manufactured to evaluate the viability of the proposed approach. The results of theoretical and experimental studies show good agreement.
19 September 2023 in IEEE Transactions on Transportation Electrification
As one of the most competitive axial-flux permanent magnet machine (AFPMM) topologies, the dual-rotor modular-stator construction of the yokeless and segmented armature (YASA) features extreme compactness and significant power and torque densities. The conventional surface-mounted PM (SPM) rotor used in YASA machines makes it challenging to satisfy the requirements of various scenarios. This paper proposes a novel AFPMM with the modular spoke-type PM (AFMSTPM) rotor combined with the segmented stator structure. The air-gap flux density is calculated by the analytical model based on the simple magnetic equivalent circuit and the relative air-gap permeance mapping methods. The influences of critical design parameters on the no-load and load conditions of the AFMSTPM are studied using the 3-D finite-element method. By comparing the AFMSTPM machine with the YASA-SPM machine, the advantages of the proposed machine with respect to PM eddy-current loss, PM irreversible demagnetization, and constant power speed range are revealed. A prototype machine was manufactured and tested to validate the predictions of the analytical and FEM results.