Energy Production and Infrastructure Center (EPIC), Department of Electrical and Computer Engineering, University of North Carolina at Charlotte, Charlotte, NC, USA
Auto-generated profile, based on publicly available information
Jiale Zhou
Energy Production and Infrastructure Center (EPIC), Department of Electrical and Computer Engineering, University of North Carolina at Charlotte, Charlotte, NC, USA
Solid-State Circuit Breaker (SSCB) has been identified as a potential game-changing technology for DC distribution systems. However, fewer SSCB research and applications have been reported in AC due to direct competition with mechanical circuit breaker (MCB), which has a proven record as AC circuit protection device. The proposed three-phase SSCB integrates application-specific functions of soft starters, contactors, circuit breakers, and thermal relays commonly present in motor control centers (MCCs). This article primarily discusses the current protection, soft start, and contactor functions of the proposed SSCB. Key design considerations for a 380 VAC/63 A three-phase SSCB are introduced, covering semiconductor device, metal oxide varistor (MOV), snubber, and heatsink selections, as well as MOV lifetime analysis. The current fault protection of the SSCB is verified at 200 A. Furthermore, novel soft start and soft turn-off strategies are proposed. The turn-off time of both strategies is determined by a grid voltage phase-locked loop (PLL) angle instead of current sensors. Finally, both simulation and experimental results using open-loop and closed-loop soft start strategies validate a significant reduction in motor inrush current. Additionally, experimental results confirm that employing the novel soft turn-off strategy extends the lifetime of the SSCB when used as a contactor, as it does not activate MOVs. By combining the contactor, circuit breaker, and soft starter functions into one, SSCB can offer competitive advantages in MCC applications.
14 July 2025 in IEEE Transactions on Power Electronics
DC arc faults in photovoltaic systems pose serious safety risks, including fire hazards and power disruption, making accurate and timely detection essential. This article presents PArcNet, a lightweight convolutional neural network architecture optimized through knowledge distillation for efficient arc fault detection in resource-constrained environments. Trained using a high-capacity teacher model, PArcNet achieves over 98% detection accuracy with only 5.04 k parameters and a memory footprint of 90 kB—making it suitable for real-time deployment on low-cost microcontrollers. The model outperforms traditional machine learning classifiers, such as support vector machines and LightGBM in both accuracy and model efficiency, and its robustness has been confirmed through 5-fold cross-validation. For real-time validation, PArcNet was implemented on an STM32H743ZI2 microcontroller and integrated with a solid-state circuit breaker, achieving arc detection and interruption in as little as 19 ms. To further reduce false positives during transient disturbances, a 5-cycle confirmation strategy was adopted, resulting in a total response time of 95 ms. Extensive testing under varied PV operating scenarios—including inverter startup, shadow occlusion, and load fluctuations—demonstrates the model’s resilience and reliability. PArcNet offers a scalable, accurate, and fast-response solution for embedded PV arc fault protection, contributing to safer and more robust renewable energy systems.
29 May 2026 in IEEE Transactions on Industrial Electronics
Solid-state circuit breakers (SSCBs) have gained significant attention in the field of power system protection due to their fast fault-interruption capability and arcless operation. However, conventional SSCBs suffer from a relatively low DC voltage utilization ratio (VUR) resulting from the leakage current and I-V characteristics of the metal oxide varistors (MOVs), which in turn reduces overall efficiency and increases the cost of power semiconductors when operating at higher DC voltages. This article proposes a novel bidirectional DC SSCB that eliminates MOV leakage current under all operating conditions through a switch–diode–MOV branch, thereby increasing the DC VUR. The proposed topology also supports modular SSCB configurations for high DC voltage applications and fast fault isolation. The DC VUR and operating principles are first analyzed, followed by key design considerations—including DC-link snubber, switch snubber, MOV, and modular structure—supported by theoretical analysis. The effectiveness of the proposed SSCB is validated experimentally at DC voltages of 850 and 1700 V with a fault-interruption current of 150 A. Finally, a comparison with existing high VUR topologies demonstrates that the proposed topology achieves the highest DC VUR of 71% among those employing 1200 V rated switches. This advancement reduces device voltage rating requirements and cost, making 1200 V devices a practical and cost-effective solution for 850 and 1700 V DC systems.