16 October 2025 in Energy
8 March 2024 in IEEE Transactions on Intelligent Vehicles
Long-range target geolocalization in outdoor complex environments has been a long-term challenge in intelligent transportation and autonomous vehicles with great interest in fields of vehicle detection, monitoring, and security. However, since traditional monocular or binocular geolocalization methods are typically implemented by depth estimation or parallax computation, suffering from large errors when targets are far away, and thus hard to be directly applied to outdoor environments. In this paper, we propose a visual servo-based global geolocalization system, namely VSG, which takes the target position information in the binocular camera images as the control signals, automatically solves the global positions according to the gimbal rotation angles. This system solves the problem of long-range static and dynamic target geolocalization (ranging from 220 m to 1200 m), and localizes the farthest target of 1223.8 m with only 3.5% localization error. VSG also realizes full-process automation by combining the deep learning-based objection detection, and its localization performance has been proved by series of experiments. This system is the longest-range global geolocalization method with preferred accuracy reported so far, and can be deployed in different geomorphology with great robustness.
31 May 2025 in Energy Conversion and Management
21 April 2026 in IEEE Transactions on Industrial Electronics
Wearable and autonomous sensing systems require efficient energy conversion under low-frequency, bidirectional mechanical excitations generated by daily human motion. This work presents a novel dual-clutch ratchet energy harvester (DREH) that converts bidirectional heel motions into unidirectional high-speed rotation, enabling direct DC power generation without conventional AC–DC rectification losses. The dual-clutch architecture ensures robust motion rectification under weak excitation and enables recovery of elastic potential energy during the liftoff phase, thereby improving effective energy utilization. A coupled dynamic–electromechanical model is developed to analyze the system behavior and predict electrical output. A compact prototype (86.4 cm3, 89 g) is fabricated and experimentally evaluated under pseudowalk and natural walking conditions. Experimental results show that elastic energy recovery increases output power by 59.5% at 0.3 Hz; at 6 km/h with a 75 $\boldsymbol{\Omega}$ load, the prototype delivers 82 mW peak and 28 mW average power with a driving force below 14 N. System-level validation demonstrates continuous operation of a wireless sensing node, confirming the DREH as an effective self-sustained power source for wearable and industrial sensing applications.
26 October 2026 in Nano Energy