4 April 2019 in International Journal of Control, Automation, and Systems
24 March 2021 in Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
Six-axis motion is essential for the evaluation of the wear failure modes of dental prostheses with complete teeth morphologies, and a high occlusal force capacity is vital for static clenching and dynamic bruxism. Additionally, the saliva environment influences abrasive particles and crack growth. The present research was aimed at the development of a six-axis masticatory and saliva simulator with these capacities. The masticatory simulator was designed based on a six-axis parallel mechanism, and the saliva simulator consisted of a saliva circuit and a temperature control loop. A control system of the masticatory and saliva simulators was constructed. The operating interface includes a centric occlusal position search, a static test, a dynamic test, a saliva supply, and data reporting. The motion and force performances of the masticatory simulator were evaluated. The flow rate and temperature change of the saliva simulator were calculated. For the occlusal position-searching, the driving amplitude is linear with the moving variables during minor one-axis motion. For the static tests, the force capacity of the driving chain is 3540 N, while for the dynamic tests, the force capacity is 1390 N. The flow rate of the saliva is 0.18–51.84 mL/min, and the saliva can effectively wet the prosthesis without the risk of overflow. Moreover, the saliva temperature can increase from room temperature (23°C) to body temperature (37°C) in about 6 min. The proposed DUT-2 simulator with six-axis motion, high force, and a salvia environment provides an in vitro testing approach to validate numerical simulation results and explain the clinical failure modes of prostheses. The centric occlusal position-searching, static tests, and dynamic tests could therefore be executed using a single testing machine. Moreover, the proposed device is more compact than previously reported six-axis masticatory simulators, including the Bristol simulator and DUT-1 simulator.
1 August 2013 in Petroleum Exploration and Development
A numerical model for jack-up penetration process was built based on the geotechnical centrifugal model test by Hossain M S.The soil flow mechanism and the relationship between penetration depth and penetration resistance were analyzed based on numerical results.The distribution pattern of the spudcan bottom pressure was investigated for the first time.The numerical results are in good agreement with Hossain M S experimental results,which indicates that the proposed model is reliable.The numerical results show that,soil flow failures,such as surface and interface swelling,cavity formation,and soil backflow,happen in the penetration process;the lower the strength ratio between stiff and soft clay is,the smaller the volume of stiff block under the spudcan is,the more continuous and uniform the stiff clay distribution above the spudcan is,and the deeper the cavity is.The higher the soil unit weight,the more the backflow stiff soil above the spudcan and the shallower the cavity.The soil unit weight has almost no effect on the stiff soil shape and volume under spudcan.The higher the strength ratio between stiff and soft clay or the lower the soil unit weight is,the more likely the punch-through occurrs.The bottom pressure first increase,then decrease,and increase sharply,from inside to outside,which proves that the linear assumption of the spudcan bottom pressure in ‘Rules for Mobile Offshore Drilling Units’ does not conform to the fact.
1 January 2019 in International Journal of Robotics and Automation
This paper aims to propose a chewing-cycle trajectory planning method for a dental testing chewing robot on basis of literature data on human chewing movements and kinematics of biomimetic temporomandibular joints in application of in vitro dental material testing.
10 March 2022 in Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
The rhythmic chewing movement pattern is dynamically reshaped to adapt to a variable chewing environment. The variance affects the wear performance of dental prostheses. This study was aimed to generate these variable rhythmic chewing movements for dental testing equipment. A six-axis parallel chewing robot DUT-2 was adopted as the dental testing equipment. Four variances were extracted from the rhythmic movement, including period, offset, amplitude, and mode. The relevant movement cases, including gradually accelerating movement, gradually increasing movement, gradually shrinking movement, and bilateral movement, were designed. Then, a central pattern generator (CPG) model based on morphed phase oscillators was proposed. According to the coupling feature of the rhythmic movements, the specific modulation method of the CPG model was provided for these movements. The simulated incisor trajectory was outputted by importing the driving amplitudes from the CPG model to the virtual prototype of the chewing robot. The bite force (considering two-body and three-body contacts) was analyzed by writing the driving amplitudes into the motion controller of the chewing robot’s physical prototype. The relative errors of offset and amplitude in the z-direction were 4.14% and 0.74%, respectively. The transition was smooth around the turning point during the gradually increasing movement and bilateral movement. For two-body contact, the average relative error and bias of the maximum bite force were 4.15% and 1.08%, respectively. The food involvement decreased the accuracies to 13.18% and 2.50%, respectively. The CPG model supplies a bionic and explicit approach for generating the variable rhythmic chewing movements. The variable movements related to chewing preferences and food properties could be replicated. Besides, the high repeatability of the maximum bite force is beneficial for running the repetitive wear tests. Finally, the CPG model makes it possible to study the influence of the variance on wear performance.