Han Feng

Han Feng

Auto-generated profile, based on publicly available information

Han Feng

School of Civil Engineering, Central South University, Changsha 410075, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 October 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
JLJianwei Liu
Jianwei Liu
HFHan Feng
Han Feng
Yongxing ZhangYongxing Zhang
Yongxing Zhang
Kaiqi ZhengKaiqi Zheng
Kaiqi Zheng
Grouting materials require not only high ultra-early-stage strength of the stone body, but also proper working performances, such as high fluidity and fast setting time, as well as good stability. Compared with the traditional pure cement grout, geopolymer grouting material has the advantages of fast setting time, high fluidity, good slurry stability, and high early strength of the slurry stone body, which is beneficial to reuse solid waste resources and can be applied to the conditions of rapid construction or repair work to a certain extent. This paper presents an experimental investigation into the performance variation of geopolymer grouting material with varied mass fractions of raw materials, and the grouting performance of geopolymer material with optimal mix proportion is also presented. The study is implemented by employing the designed experimental schemes, focused on fluidity and setting times, as well as ultra-early-stage (4 h, 8 h, 12 h, 16 h, 20 h, and 24 h) mechanical strength. The experimental result demonstrates that both ground granulated blast-furnace slag (GGBS) content and the mass ratio of activator solution to solid have influence on the working performance of geopolymers, and both GGBS content and activator concentration have influence on the mechanical strength of geopolymers. Furthermore, the variance analysis demonstrates that the fluidity of geopolymer material is dominantly affected by the mass ratio of activator solution to solid, the setting time of geopolymer material is mainly influenced by GGBS content, and the mechanical strength of geopolymer material is mainly affected by activator concentration. Moreover, the recommended mix proportion of geopolymer grouting material is proposed in this study, in which the replacement rate of GGBS is 45%; the modulus and concentration of modified sodium silicate activator are 1.5 and 75%, respectively; and the mass ratio of activator solution to solid is 1.5. In the recommended mix proportion, the geopolymer material has excellent comprehensive performance to implement grouting operation, in which the compressive and tensile strengths of the stone body reach 12.2 MPa and 0.8 MPa in 4 h, and reach 21.2 MPa and 2.1 MPa in 24 h. The fluidity is 223 mm, the initial setting and final setting times are 50 min and 57 min, the slurry stability of geopolymer material is good without liquid precipitation, in which the setting time is far less than 2 h. This work provides the experimental foundations for investigating the performance of geopolymer grouting material, which is also expected to provide reference for the further application and promotion of geopolymer materials used for grouting operations in rapid construction or repair work.

4 January 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WLWeihua Lu
Weihua Lu
LMLinchang Miao
Linchang Miao
Junhui ZhangJunhui Zhang
Junhui Zhang
Yongxing ZhangYongxing Zhang
Yongxing Zhang
JLJing Li
Jing Li
To investigate the deformation and damping characteristics of cement treated and expanded polystyrene (EPS) beads mixed lightweight soils, this study conducted a series of triaxial shear tests cyclic loading for different confining pressures, cement contents, and soil categories. Through repeated loading and unloading cycles, axial accumulative strain, resilient modulus, and damping ratio versus axial total strain were analyzed and the mechanical behavior was revealed and interpreted. Results show that the resilient modulus increases with increasing confining pressure and cement content. A decreasing power function can be used to fit the relationship between the resilient modulus and the axial total strain. Although sandy lightweight specimens usually own higher resilient modulus than silty clay lightweight specimens do, the opposite was also found when the axial total strain is larger than 8% with 50 kPa confining pressure and 14% cement content. For damping ratio the EPS beads mixed lightweight soil yields a weak growth trend with increasing axial total strain and a small reduction with higher confining pressure and cement content. For more cementations, the damping ratio of the sandy lightweight soil is always smaller than the silty clay lightweight soil. Nonetheless, the differences of damping ratios that were obtained under all of the test conditions are not significant.