This paper presents a multi-objective optimization design method for an electric-excitation claw-pole field-modulated (EECPFM) machine, which employs a ring-shaped excitation coil in the stator cavity formed by the claw poles, thus eliminating the slip rings and brushes, and improving the operation reliability. Due to axial asymmetry, the traditional optimization design based on 3-dimensional finite element analysis (3D-FEA) is time-consuming. The key of the proposed optimization method is to incorporate the air-gap field harmonic characteristics into the EECPFM machine design, namely, by taking the main air-gap field harmonics having strong influence on torque capability and torque ripple as multiple optimization objectives, and combing the response surface (RS) model and the artificial bee colony (ABC) algorithm to implement the optimization process, thus saving time. Subsequently, with the help of 3D-FEA, the electromagnetic performance between the initial and optimal structure are compared, i. e. 12% torque improvement and 2.8% ripple suppression. Finally, a EECPFM prototype is fabricated and the validity of the proposed optimization design is evidenced by the experiments.
This paper proposes and analyzes a novel radial partitioned stator HTS-excitation flux-switching (RPS-HTSFS) machine. The key is that the single ring-shaped HTS-excitation coil is independently placed in the coaxial claw-pole outer stator while the armature windings are wound around the U-shaped iron core on the inner flux-switching armature stator without permanent magnets. This solution has been explored to realize the physical isolation of armature winding and excitation winding, relieving the influence of armature field on the HTS-excitation coil. Moreover, only a single ring-shaped HTS-excitation coil is employed, therefore, reducing the HTS wires and the bending strain of the HTS-excitation coil. Also, the special refrigeration system can realize stationary seals of the double-layer ring-shaped cooling Dewar pattern, improving the cooling performance. By using the three-dimensional finite element analysis (3D-FEA), the machine performances are investigated and the validity of the proposed machine is verified.
The resonant frequency of LLC resonant converter has a wide range of switching frequency due to load changes and it easily enters high frequency band during light load and no‐load conditions. Therefore, this study proposes a self‐adaptation load change control strategy. According to different load conditions, the converter automatically selects the best control mode among three control methods, which are pulse‐frequency modulation, symmetrical pulse‐width modulation and burst. By fully utilising the characteristics of the load‐independent point in the gain curve and the relationship between the resonant current and the load, the switching conditions between the control strategies are further designed and optimised. In addition, based on the adaptive load change control strategy, the design value of k (the ratio of the excitation inductor to the resonant inductance of the transformer) is increased, which solved the disadvantage of large change of the switch range. And the converter can not only effectively control the output voltage during light load, but also works in the soft‐switching state, which can improve the working efficiency of the converter to above 91%. Finally, taking a three‐phase staggered parallel LLC resonant converter as the research object, an experimental prototype was developed based on SiC devices to verify the correctness and rationality of the proposed control strategy.
9 June 2022 in Journal of Electrical Engineering & Technology