1 March 2014 in Manufacturing Technology
The paper presents a short crack theory together with the finite element method (FEM), which is used to model crack initiation during the operational phase of a pipeline. To simulate the crack, the virtual crack extension (VCE) method, impleme...
1 February 2020 in IOP Conference Series: Materials Science and Engineering
A principle of 3D printing is based on formation of continuous layers of materials up to a formation of the final shape. Materials for production of given components are composite materials, especially on the basis of so-termed CFRP, CRP, (carbon fibre – so-termed polymers reinforced by carbon fibres). The objective of this paper is to predict the deformation length of carbon/onyx composite laminates using Finite Element Analysis (FEA) and compare with universal testing machine INOVA FU 160 deformation results through the tensile load. Specimen were printed at raster orientation angles of 0°, 45° and 90° to test orientation effects on part strength. 16 ply CFRP specimens with various stacking sequences were analysed for their strength and displacements. A shell model has been established for simulation of the tensile test composite specimen which enables to understand the mechanical strength and strain at failure of the composite materials. The simulations of experiment are provided in FEM program ANSYS and ANSYS/Workbench.
1 February 2016 in Manufacturing Technology
The article is deals by an introduction to the theory of impact load for thin plates. This is the plates that are characterized by a structure which is bounded by upper and lower surface plane. These surfaces are spaced by a distance h, which ...
1 April 2015 in Manufacturing Technology
We can define wear as a phenomenon, which humanity can't fully explain and many do not understand it well. It is known for several millennia. It's an action, which can't be avoided. Often it's a critical factor affecting lifetime of device par...
27 December 2014 in Procedia Engineering
The paper describes briefly the problem of elastic-plastic shock wave propagation in solids. Such waves originate by acting of explosion waves or by high velocity impact of solid parts on the structure. Computational simulations are applied to the elastic problem of propagation of waves in composite material reinforced by fibres. The fibres are supposed to be much stiffer than the matrix. The wave in such material is influenced by reflexion and refraction on the interface between fibres and the matrix and by the interaction of then waves. The wave is strongly damped in such composites in this way. The aim of this paper is to contribute better understanding and modelling of waves propagation using commercial software ABAQUS.
1 October 2014 in Manufacturing Technology
The requirements for reducing the weight and increasing the strength and carrying capacity of the plane and space structures are constantly growing. The one of the way how to meet demands is to use the layered shell composite structures. They ...