1 November 2014 in AAPG Bulletin
30 July 2014 in Geological Society of America Bulletin
Natural fractures form preferred pathways for basinal fluid flow and associated heat and mass transport. In gas sandstone reservoirs with low matrix permeability, fractures provide flow pathways between organic-rich source and reservoir layers during gas charge, and between matrix pores, hydraulic fractures, and the well bore during production. While the formation of natural fractures has previously been associated with gas generation and pore-fluid pressure increase through a process referred to as natural hydraulic fracturing, other driving mechanisms such as stress changes by tectonic or exhumation processes remained viable alternatives. To test whether these mechanisms contributed to fracture development, we investigated the spatial and temporal distribution of fracture formation and its relationship to gas generation, migration, and charge in sandstone of the Cretaceous Mesaverde Group across the entire production interval on a basinwide scale. Using fluid inclusion microthermometry of crack-seal fracture cement formed concurrently with fracture opening, we observed temperature trends that, when compared with temperature evolution models of the formation, date fracture formation between 41 and 6 Ma in the northern and between 39 and 6 Ma in the southern Piceance Basin. The onset of fracture formation 20–30 m.y. prior to maximum burial eliminates changes in stress state associated with exhumation as a mechanism for triggering the onset of fracture formation. Instead, calculated paleo–pore-fluid pressures of 40–90 MPa (5800–13,000 psi) during fracture opening and the presence of methane-rich inclusions in fracture cement suggest that fracture formation was aided by high pore-fluid pressures during gas generation in organic-rich shales and coals and associated charging of adjacent and interlayered sandstone reservoirs. A 10–20 m.y. age progression in the onset of fracture formation from deeper to shallower horizons of the Mesaverde Group is consistent with gas generation and onset of fracture formation activated by burial temperature with limited upward migration of gas at this stage of reservoir evolution. This age progression with depth is inconsistent with fracture formation triggered by changes in stress conditions associated with tectonic or structural processes expected to affect the entire formation synchronously. Our observations are thus most consistent with fracture formation by natural hydraulic fracturing in response to gas generation in interbedded source layers and reservoir charge. Based on widespread observations of fractures with similar structural and diagenetic attributes, we consider natural hydraulic fracture formation in response to thermocatalytic gas generation to be a fundamental mode of brittle failure in otherwise structurally quiescent basins.
1 December 2012 in AAPG Bulletin
The Upper Cretaceous Mesaverde Group in the Piceance Basin, Colorado, is considered a continuous basin-centered gas accumulation in which gas charge of the low-permeability sandstone occurs under high pore-fluid pressure in response to gas generation. High gas pressure favors formation of pervasive systems of opening-mode fractures. This view contrasts with that of other models of low-permeability gas reservoirs in which gas migrates by buoyant drive and accumulates in conventional traps, with fractures an incidental attribute of these reservoirs. We tested the aspects of the basin-centered gas accumulation model as it applies to the Piceance Basin by determining the timing of fracture growth and associated temperature, pressure, and fluid-composition conditions using microthermometry and Raman microspectrometry of fluid inclusions trapped in fracture cement that formed during fracture growth. Trapping temperatures of methane-saturated aqueous fluid inclusions record systematic temperature trends that increase from approximately 140 to 185°C and then decrease to approximately 158°C over time, which indicates fracture growth during maximum burial conditions. Calculated pore-fluid pressures for methane-rich aqueous inclusions of 55 to 110 MPa (7977–15,954 psi) indicate fracture growth under near-lithostatic pressure conditions consistent with fracture growth during active gas maturation and charge. Lack of systematic pore-fluid–pressure trends over time suggests dynamic pressure conditions requiring an active process of pressure generation during maximum burial conditions. Such a process is consistent with gas generation within the Mesaverde Group or by gas charge from deeper source rocks along fracture and fault systems but is inconsistent with significant high-pressure generation by compaction disequilibrium during earlier stages of burial. On the basis of a comparison of trapping temperatures with burial and thermal maturity models, we infer that active gas charge and natural fracture growth lasted for 35 m.y. and ended at approximately 6 Ma. Our results demonstrate that protracted growth of a pervasive fracture system is the consequence of gas maturation and reservoir charge and is intrinsic to basin-centered gas reservoirs.
1 February 2011 in Geochimica et Cosmochimica Acta
1 December 2018 in Economic Geology
Fluid inclusions in clearly defined fluid inclusion assemblages (FIAs) from various geologic environments were examined to assess the uncertainty associated with determining the temperature of a fluid event based on fluid inclusion homogenization temperatures (Th). A fluid event is defined as a physical or chemical process such as the healing of a microfracture or the formation of a growth zone in a crystal that occurs in the presence of a fluid phase and results in trapping of fluid inclusions to form an FIA. Examination of data from a large number of fluid events collected within a rigorous temporal and spatial (paragenetic) framework forms the basis for developing a complete fluid pressure-temperature-composition (PTX) history. The range in homogenization temperatures of fluid inclusions within well-constrained FIAs was determined, and the minimum (smallest) range in Th, the median range in Th, and the first quartile (Q1 at 25%) and third quartile (Q3 at 75%) of the median Th ranges were calculated for different fluid environments, including the following: While all environments show some FIAs in which all the fluid inclusions homogenize at essentially the same temperature (range = ≤1°C), we propose that the median range in Th reported here represents a reasonable and achievable constraint on the uncertainty associated with the temperature of a fluid event in the environments examined. In summary, the temperature of a fluid event, as represented by the range in Th of the fluid inclusions within an individual FIA, can be constrained to better than 15°C in all environments examined, and in Mississippi Valley-type and low-permeability (deep) sedimentary basin environments, the range in Th can be constrained to better than 2°C. The processes that produce variability in Th of fluid inclusions within an FIA are many and include natural variations in temperature, pressure, or fluid composition during trapping of the FIA, trapping of immiscible fluids, various forms of reequilibration in nature such as necking, stretching, and leakage, and modification of the inclusions during sample preparation and data collection. If the range in homogenization temperature for an individual FIA is found to be greater than the median range determined here for that environment, then assessment of the cause of the variability might provide useful information concerning the trapping and posttrapping history of the sample.