31 March 2008 in Applied Physics Letters
Charge is observed at the regrowth interface for heterostructure field-effect transistors (HFETs) grown on semi-insulating (SI) bulk GaN substrates, even with Fe doping in the regrown buffer layer for reduction of the interface charge. Ultraviolet photoenhanced chemical (PEC) etching is used to treat the surface of SI bulk GaN substrates. Employing optimized etching conditions, a very smooth surface is achieved for the bulk GaN substrate after the etching. The charge at the regrowth interface is eliminated for HFETs grown on etched SI GaN substrates. Secondary ion mass spectrometry measurements show that the Si impurity concentration at the regrowth interface for HFETs grown on etched SI GaN substrates is much lower than that for HFETs grown on unetched SI GaN substrates, which suggests that the charge-containing layer on the SI substrate is removed by PEC etching and that the effects of the reduced charge layer near the regrowth interface can be eliminated by Fe doping for HFETs grown on etched SI substrates.
27 July 2025 in ACM Transactions on Graphics
We present Diffuse-CLoC, a guided diffusion framework for physics-based look-ahead control that enables intuitive, steerable, and physically realistic motion generation. While existing kinematics motion generation with diffusion models offer intuitive steering capabilities with inference-time conditioning, they often fail to produce physically viable motions. In contrast, recent diffusion-based control policies have shown promise in generating physically realizable motion sequences, but the lack of kinematics prediction limits their steerability. Diffuse-CLoC addresses these challenges through a key insight: modeling the joint distribution of states and actions within a single diffusion model makes action generation steerable by conditioning it on the predicted states. This approach allows us to leverage established conditioning techniques from kinematic motion generation while producing physically realistic motions. As a result, we achieve planning capabilities without the need for a high-level planner. Our method handles a diverse set of unseen long-horizon downstream tasks through a single pre-trained model, including static and dynamic obstacle avoidance, motion in-betweening, and task-space control. Experimental results show that our method significantly outperforms the traditional hierarchical framework of high-level motion diffusion and low-level tracking.
8 January 2010 in IEEE Computer Graphics and Applications
A geometric-modeling system automates design and fabrication of products customized for consumers. Specifically, it maps designs onto different reference model shapes and then unfolds them into 2D pattern pieces. A map-guided algorithm automatically positions the pieces according to industrial requirements.
27 November 2020 in ACM Transactions on Graphics
We present a method of training character manipulation of amorphous materials such as those often used in cooking. Common examples of amorphous materials include granular materials (salt, uncooked rice), fluids (honey), and visco-plastic materials (sticky rice, softened butter). A typical task is to spread a given material out across a flat surface using a tool such as a scraper or knife. We use reinforcement learning to train our controllers to manipulate materials in various ways. The training is performed in a physics simulator that uses position-based dynamics of particles to simulate the materials to be manipulated. The neural network control policy is given observations of the material (e.g. a low-resolution density map), and the policy outputs actions such as rotating and translating the knife. We demonstrate policies that have been successfully trained to carry out the following tasks: spreading, gathering, and flipping. We produce a final animation by using inverse kinematics to guide a character's arm and hand to match the motion of the manipulation tool such as a knife or a frying pan.
16 November 2009 in Applied Optics
Subdivision is one of the essential methods to improve the measurement resolution of optical instruments. A new method is proposed to solve bidirectional subdivision and direction recognition for orthogonal interference signals by constructing two sets of reference signals and using zero-cross detection. The experimental results prove that the method is efficient for orthogonal signals and has good real-time performance by field-programmable gate array realization. This method is easy to realize by use of electronic design automation tools and can be widely used in the signal processing system of optical measurement instruments such as a moiré fringe measurement system and laser interferometer.