2 April 2019 in Nature Communications
Ceramic fuel cells offer a clean and efficient means of producing electricity through a variety of fuels. However, miniaturization of cell dimensions for portable device application remains a challenge, as volumetric power densities generated by readily-available planar/tubular ceramic cells are limited. Here, we demonstrate a concept of ‘micro-monolithic’ ceramic cell design. The mechanical robustness and structural integrity of this design is thoroughly investigated with real-time, synchrotron X-ray diffraction computed tomography, suggesting excellent thermal cycling stability. The successful miniaturization results in an exceptional power density of 1.27 W cm−2 at 800 °C, which is among the highest reported. This holistic design incorporates both mechanical integrity and electrochemical performance, leading to mechanical property enhancement and representing an important step toward commercial development of portable ceramic devices with high volumetric power (>10 W cm−3), fast thermal cycling and marked mechanical reliability.
12 November 2018 in Nature Communications
We report the results from the first 5D tomographic diffraction imaging experiment of a complex Ni–Pd/CeO2–ZrO2/Al2O3 catalyst used for methane reforming. This five-dimensional (three spatial, one scattering and one dimension to denote time/imposed state) approach enabled us to track the chemical evolution of many particles across the catalyst bed and relate these changes to the gas environment that the particles experience. Rietveld analysis of some 2 × 106 diffraction patterns allowed us to extract heterogeneities in the catalyst from the Å to the nm and to the μm scale (3D maps corresponding to unit cell lattice parameters, crystallite sizes and phase distribution maps respectively) under different chemical environments. We are able to capture the evolution of the Ni-containing species and gain a more complete insight into the multiple roles of the CeO2-ZrO2 promoters and the reasons behind the partial deactivation of the catalyst during partial oxidation of methane.
1 October 2019 in Journal of CO2 Utilization
29 January 2020 in Faraday Discussions
The effect of different calcination protocols on the performance of a Na–Mn–W/SiO 2 catalyst is studied with laboratory and synchrotron X-ray based characterisation techniques.
2 January 2019 in The Journal of Physical Chemistry C
An La-Sr/CaO catalyst was studied operando during the oxidative coupling of methane (OCM) reaction using the X-ray Diffraction Computed Tomography (XRD-CT) technique. Full pattern Rietveld refinement analysis was performed in order to reveal the evolving solid-state chemistry during the temperature ramp, OCM reaction, as well as after cooling to room temperature. We observe a uniform distribution of the catalyst main components: La2O3, CaO-SrO mixed oxide and the high temperature rhombohedral polymorph of SrCO3. These were stable initially in the reaction, however doubling the Gas Hourly Space Velocity (GHSV) resulted in the decomposition of SrCO3 to SrO, which subsequently led to the formation of a second CaO-SrO mixed oxide. These two mixed CaO-SrO oxides differed in terms of the extent of Sr incorporation into their unit cell. By applying Vegard’s law during the Rietveld refinement, it was possible to create maps showing the spatial variation of Sr occupancy in the mixed CaO-SrO oxides. The formation of the Sr doped CaO species is expected to have an important role in this system, through the enhancement of the lattice oxygen diffusion as well as increased catalyst basicity.
22 April 2021 in Journal of Materials Chemistry A
Operando 5D X-ray diffraction imaging reveals complex heterogeneities across multiple length scales in a catalytic reactor for the partial oxidation of methane reaction.