1 November 1990 in IEEE Photonics Technology Letters
The first reflection modulator using electroabsorption in strained InGaAs-GaAs quantum wells is reported. With an insertion loss of 1.9 dB and a reflectivity change of 42% at room temperature, the modulator is comparable to the best devices reported in GaAs-Al-GaAs system. A framework is presented for examining the tradeoff between insertion loss and modulation ratio from a theoretical perspective and compare the predicted limits to reported devices.
18 March 2025 in IEEE Photonics Technology Letters
We demonstrate the highest data rate links using NRZ modulation of a transferred LED. LEDs transferred onto a sapphire backplane driven by a high-speed external source are modulated at 10Gb/s NRZ for a total extrapolated bandwidth of about 3Tb/s. The transmitters consume ~1pJ/bit with a 10-10 BER. Arrays of ~300 GaN microLEDs transferred onto a Si backplane with integrated drivers are modulated at 3.5 Gb/s for a total bandwidth of ~1Tb/s. Such highly parallel optical interconnects have the potential to greatly improve the power consumption and density of chip-to-chip communications.
5 February 1996 in Applied Physics Letters
We show that silicon-on-insulator substrates, combined with a low index waveguide, can yield intrinsically wavelength-selective devices for multiwavelength applications. We demonstrate a simple wavelength-selective photodetector that resembles an asymmetric directional coupler with a polymer waveguide coupled to a silicon waveguide. Only certain wavelengths are phase-matched between the two guides and transfer from the polymer to the silicon. Operating the device at the band edge of silicon, the coupled radiation is absorbed and generates photocurrent. The 400 μm long detector exhibits a linewidth of a few nm, limited by the uniformity of the silicon-on-insulator material.
29 July 2024 in IEEE Photonics Technology Letters
Gallium-nitride-based, blue micro-light-emitting diodes (micro-LEDs) with electro-optical -3 dB modulation bandwidths of 3.73 GHz at 11 kA/cm 2 at room temperature and 4.00 GHz at 9 kA/cm 2 at 200°C are reported. These bandwidths are the highest reported thus far for micro-LEDs. The micro-LEDs operate at high temperatures, up to 400°C, and bandwidths improve with increased temperatures. The lifetimes and recombination rates of the micro-LEDs active layer are determined by measuring and analyzing the impedance, modulation response, and radiative efficiency. This analysis shows increasing bandwidths with increasing current density and temperature resulting from dominant non-radiative lifetimes.