21 October 2021 in Physical Review Accelerators and Beams
BLUE is a four-cavity linear transformer driver system in the Plasma, Pulsed Power, and Microwave Laboratory at the University of Michigan. Each BLUE cavity can store up to 2 kJ of electrical energy and provide an open-circuit voltage of 200 kV when using the maximum bipolar charge voltage of . The impedance of each cavity is approximately , and the rise time of the current pulse into a reasonably matched load is . The system will be used to study high-energy-density -pinch plasmas and high-power radiation sources. The facility has been equipped to handle intense bursts of x rays, nuclear fusion neutrons, and high-power microwaves (HPM). This paper reports on the construction and performance of the first (prototype) BLUE cavity and its auxiliary systems, as well as preliminary experiments using the cavity to drive resistive loads and a magnetically insulated line oscillator (MILO) HPM device. In these initial single cavity, BLUE-driven MILO experiments, 1.19 GHz microwave oscillations were successfully generated.
1 May 2021 in Review of Scientific Instruments
Power-flow studies on the 30-MA, 100-ns Z facility at Sandia National Laboratories have shown that plasmas in the facility’s magnetically insulated transmission lines (MITLs) and double post-hole convolute can result in a loss of current delivered to the load. To study power-flow physics on the 1-MA, 100-ns MAIZE facility at the University of Michigan, planar MITL loads and planar post-hole convolute loads have been developed that extend into the lines of sight for various imaging diagnostics on MAIZE. These loads use 3D-printed dielectric support structures lined with thin foils of either aluminum or stainless steel. The metal foils serve as the current-carrying power-flow surfaces, which generate plasma during the current pulse. The foil thickness (50 µm) and widths (11.5–16 mm) are selected to ensure a sufficient linear current density (0.5–0.7 MA/cm) for plasma formation. Laser backlighting (532 nm) and visible-light self-emission imaging capture the overall plasma evolution in the anode–cathode gaps, including the gap closure velocities (1–4 cm/μs).
5 September 2024 in IEEE Transactions on Plasma Science
A gas-puff z-pinch experimental platform has been developed for the 0.5–1-MA, 100–250-ns MAIZE pulsed power facility at the University of Michigan. The experiment consists of a nozzle and fast-valve assembly, which is integrated into the pulsed power circuit and forms a gas load in the center of the pulsed power device. The capacitors that form the pulsed power device discharge through the gas, forcing it to pinch on axis. Such a gas-puff z-pinch is afflicted by various instabilities, the mitigation of which is achieved by imploding multiple concentric shells of gas with increasing gas density toward the center of the pinch and imploding high mass number gases onto low mass number gases. These constraints suggested the development of a triple-nozzle system with an outer shell, inner shell, and central jet. A voltage-driven thin-shell model was used to inform the design of the gas-puff nozzles’ radii and gas pressures in the fast valve. The hardware was developed based on this point design. The MAIZE transmission lines were redesigned to accommodate the new hardware. Systems that support the gas-puff experiment include a gas manifold that supplies the nozzles with gas; a driver that pulses the valve to opened and closed states; and a logic circuit that provides a signal if and only if the gas-puff load successfully forms, to trigger MAIZE and the diagnostics. These were all constructed, tested, and integrated into the experiment. Additional diagnostics were also developed and fielded: a 2-D interferometer, a four polycrystalline diamond (PCD) detector array with Ross filter pairs, and neutron bubble detectors. Characteristic results from the first z-pinch experiments conducted with this gas-puff system are presented. The system demonstrates an x-ray energy output of up to $720~\pm~50$ J per pulse and a neutron output of up to $(4.9 \pm 0.5) \ttimes10^8$ neutrons per pulse. Notably, this system has enabled shot rates of over 30 z-pinch experiments per day on MAIZE.
1 October 2025 in Physics of Plasmas
Results from theory, simulation, and experiment are presented that support the concept of sub-microsecond formation and compression of centimeter-scale field-reversed configurations (FRCs) for fusion yield. Such FRCs require 10–100+ T of applied field and are intended for compression to high-energy-density conditions in solid liners on the Z-machine and future accelerators. First, MHD simulations including anomalous resistivity are presented. These simulations suggest that empirical scaling laws from the literature might be used to predict the resistive lifetime of high-field FRCs, and these lifetimes are often in excess of 1 μs. The effects of applied field shape/gradients are also explored in simulation, and an analytic prediction for FRC ejection time from the liner is verified. Second, a high-field FRC formation platform on a university-scale pulsed-power facility is detailed. The Z-discharge pre-ionization (ZPI) system is characterized and shown to have critical effects on the plasma. Fast-frame visible image sequences are presented for various gas pressure, bias field, and ZPI settings. The expected plasma dynamics can be seen in the images, with long-lived plasma annuli (possibly FRCs) produced only under the proper conditions. Optimistic conclusions are drawn, and future research directions are recommended.
11 June 2024 in Plasma Physics and Controlled Fusion
We report on the results of point-projection ion deflectometry measurements from a mid-size university z-pinch experiment. A 1 MA 8 kJ LTD generator at the University of Michigan (called MAIZE) drove a hybrid x-pinch (HXP) with a deuterated polyethylene fiber load to produce a point-like source of MeV ions for backlighting. In these experiments, 2.7 MeV protons were generated by DD beam-target fusion reactions. Due to the kinematics of beam-target fusion, the proton energies were down-shifted from the more standard 3.02 MeV proton energy that is released from the center-of-mass rest frame of a DD reaction. In addition to the 2.7 MeV protons, strongly anisotropic beams of 3 MeV accelerated deuterons were detected by ion diagnostics placed at a radial distance of 90 mm from the x-pinch. Numerical reconstruction of experimental data generated by deflected hydrogen ion trajectories evaluated the total current in the vacuum load region. Numerical ion-tracking simulations show that accelerated deuteron beams exited the ion source region at large angles with respect to the pinch current direction.
1 April 2024 in Review of Scientific Instruments
An X-pinch load driven by an intense current pulse (>100 kA in ∼100 ns) can result in the formation of a small radius, runaway compressional micro-pinch. A micro-pinch is characterized by a hot (>1 keV), current-driven (>100 kA), high-density plasma column (near solid density) with a small neck diameter (1–10 µm), a short axial extent (<1 mm), and a short duration (≲1 ns). With material pressures often well into the multi-Mbar regime, a micro-pinch plasma often radiates an intense, sub-ns burst of sub-keV to multi-keV x rays. A low-density coronal plasma immediately surrounding the dense plasma neck could potentially shunt current away from the neck and thus reduce the magnetic drive pressure applied to the neck. To study the current distribution in the coronal plasma, a Faraday rotation imaging diagnostic (1064 nm) capable of producing simultaneous high-magnification polarimetric and interferometric images has been developed for the MAIZE facility at the University of Michigan. Designed with a variable magnification (1–10×), this diagnostic achieves a spatial resolution of ∼35 µm, which is useful for resolving the ∼100-μm-scale coronal plasma immediately surrounding the dense core. This system has now been used on a reduced-output MAIZE (100–200 kA, 150 ns) to assess the radial distribution of drive current immediately surrounding the dense micro-pinch neck. The total current enclosed was found to increase as a function of radius, r, from a value of ≈50±25 kA at r ≈ 140 µm (at the edge of the dense neck) to a maximal value of ≈150±75 kA for r ≥ 225 µm. This corresponds to a peak magnetic drive pressure of ≈75±50 kbar at r ≈ 225 µm. The limitations of these measurements are discussed in the paper.