1 April 2019 in Journal of Power Sources
28 November 2024 in ACS Nano
15 May 2018 in IEEE Transactions on Applied Superconductivity
Resistive Superconducting Current Limiter (RSFCL) is a focus in the development of current limit technology, especially in the field of AC transmission. It has a significant effect of limiting current. However, the traditional double-wound non-inductive pancake coil has an inevitable drawback. Due to its special structure the flashover would occur easily during the fault in high voltage envi-ronment. That would make the SFCL working in an uncon-trolled state. So novel coil structures or connection modes are de-manded to meet the protection of Voltage Source Converter based High Voltage Direct Current (VSC-HVDC). In this paper the magnetic distribution of different flux coupling connection modes of the coils is analyzed through the simulations based on continuous pancake coil. A flux coupling type SFCL with pan-cake coils is designed and fabricated. The limitation process of the SFCL coils is analyzed through simulations and experiments in millisecond level. The parallel current sharing characteristics of the coils are researched through experiments in different impulse current. Meanwhile, a continuous pancake coil is made to study the series voltage sharing features of the coil. The result of this paper has certain guiding significance in the design of DC RSFCL.
21 July 2020 in IEEE Transactions on Applied Superconductivity
The short-circuit fault current on the DC side affects the operation safety of the multi-terminal flexible HVDC transmission system (MTDC) seriously. The resistance-type superconducting fault current limiter (RSFCL) has received extensive attention in limiting the DC impact current because it has fast response speed and zero impedance at steady state. YBCO tapes are susceptible to delamination damage under large DC impact and it will affect the operation of RSFCLs. However, the existing methods of distinguishing the delamination damage of YBCO tape need an extra observation or testing after DC impact. These methods cannot meet the requirements for monitoring and protection when RSFCLs coming into use in the power system. In this paper, the Hilbert-Huang Transform (HHT) is used to analyze the delamination damage of YBCO tapes under DC impact to avoid extra observation and testing. The DC impact test on the YBCO tape sample is carried out and the test data are obtained. HHT is applied on the Joule thermal power waves (TPWs) of the YBCO tape samples obtained from the DC impact test as the input signal. Hilbert spectrums and instantaneous energy spectrums (IEs) of the TPW signals are calculated and the difference between IEs of TPW signals of intact samples and delaminated samples is shown and explained. The feasibility of IEs of TPW signals as a monitoring target to avoid the stratification damage of YBCO tapes. The proposed method aids in the on-load monitoring on RSFCLs and provided a new tack for related research.
10 April 2023 in IEEE Transactions on Applied Superconductivity
Nowadays, copper Litz wire is widely used in the electrical applications. This wire is a particular type of multistrand wire, which is designed to reduce the skin effect and proximity effect losses in conductors. As the frequency dependence of losses in YBCO coils and Litz coils is different, how to determine the frequency band in which superconducting coils have an efficiency advantage over copper coils is a problem that needs to be solved. In response to the above concerns, a theory of the applicable frequency band of YBCO coils are proposed. Both experimental and numerical methods are used to study the characteristics of the applicable frequency band. Results show that the applicable frequency band of the YBCO coil decreases as the transport current increases, while its dependence on the radius of the coil is small. The obtained conclusions can be used as a reference when superconducting coils are used to replace copper coils.