The α-WC(0001) surface and β-SiC(111)/α-WC(0001) interface were studied by first-principles calculation based on density functional theory. It is demonstrated that the α-WC(0001) surface models with more than nine atom-layers exhibit bulk-like interior, wherein the surface relaxations localized within the top three layers are well converged. Twenty-four specific geometry models of SiC/WC interface structures with different terminations and stacking sites were chosen. The calculated work of adhesion and interface energy suggest that the most stable interface structure has the C-C bonding across the interface, yielding the largest work of adhesion and the lowest interface energy. Moreover, the top-site stacking sequence is preferable for the C/C-terminated interface. The effects of the interface on the electronic structures of the C/C-terminated interfaces are mainly localized within the first and second layers of the interface. Calculations of the work of adhesion and interface energy provide theoretical evidence that the mechanical failure may initiate at the interface or in SiC but not in WC.
First-principles calculations of β-SiC(111)/α-Ti(0001) interface have been performed and the adhesion strength, interface energy, interfacial fracture toughness, and electronic structure are obtained. Six C-terminated β-SiC(111)/α-Ti(0001) interface models are investigated to clarify the influence of stacking sites and Ti atoms tilt direction on the interface bonding and fracture toughness. The hollow-site-stacked interfaces, in which Ti atoms locate on the hollow site of interfacial C atoms (cases III and IV), are more thermodynamically stable with larger work of adhesion, and interfacial fracture toughness. The center-site-stacked (cases I and II) and top-site-stacked (cases V and VI) interfaces have a decreasing interface adhesion as the order. The electronic structure of hollow-site-stacked interface (case IV) gives the evidence that atomic bonding exists between interfacial C, Si, and Ti atoms, and the C-Ti bonds exhibit more covalent features than Si-Ti. The tilt direction of Ti atoms, namely the stacking style of Ti, has a subtle and secondary effect on the interface stability.