5 April 2021 in IEEE Transactions on Transportation Electrification
An on-board energy-efficient driving advisory system is proposed for a high-speed train, which runs on a vehicle control unit. A data interaction framework is presented to monitor train real-time state and temporary speed limitations. A bilevel optimal control method is designed to calculate the energy-optimal speed profile in real time. Specifically, the upper level is to calculate the min-time speed profile based on Pontryagin’s maximum principle, and the lower level is to determine coast profiles according to the Lagrange multiplier technique. The driving advice is extracted from the optimized trajectories. If the deviation of the train trajectory is detected, the speed profile is updated online. To highlight the achievable improvements of the proposed optimal control method, a pseudospectral method and a quadratic programming method are introduced as performance comparison. Simulation results show that the proposed method yields an energy-optimal solution within a control cycle of 256 ms. The driver-in-the-loop tests prove that the driving advice can be exactly followed by drivers. The proposed driver advisory system can improve the performance of punctuality and energy efficiency.
18 January 2022 in IET Intelligent Transport Systems
The energy consumption and operation efficiency of congested rail networks is a primary concern of railway operators. Although achieving the optimal running time supplement helps to reduce the energy consumption of trains, the section running time is usually limited to improve the operation efficiency, which will influence the optimal running time supplement. Here, based on the Lagrange analysis and the Pontryagin's maximum principle, the optimal structure of an energy‐efficient driving strategy is found for a train journey on non‐level track subject to section running time constraints. The existence and uniqueness of the optimal solution for this constrained energy‐efficiency train control problem is proved by the perturbation analysis method, and based on which an algorithm for solving this problem is proposed. Finally, the results are illustrated by finding optimal control sequences and associated speed profile for the freight train in some elementary but realistic examples.
1 December 2021 in IET Intelligent Transport Systems
For a selected train journey with multiple trains in the same traction power system, the given driving strategies of other trains can be abstracted as available external power flow. Aims at reducing the energy consumption of the multi‐train system, this paper presents an analytical solution for optimising the selected train trajectory to maximise the utilisation of the external power flow. Specifically, a spatial‐temporal area which combine the track grade along space and the external power over time is constructed and the problem is converted into the energy‐efficient control of a train travels in the spatial‐temporal area. Classical methods of constrained optimisation is used to show that the set of the optimal control modes and the optimal driving speed for the proposed problem are in a state of change. In order to obtain the optimal driving strategy, the spatial‐temporal area is divided into grids, and the evolution of a key adjoint variable when the external power changes is discussed. The authors illustrate our results by finding optimal control sequences and associated speed profile for the freight train in some elementary but realistic examples.
18 July 2022 in IET Intelligent Transport Systems
The traction system efficiency of electrical locomotive varies with the operating conditions. To minimize the mechanical energy consumption of train does not mean that the electric energy consumption is also minimum. This paper studies the energy‐efficient train control (EETC) problem considering the dynamic traction system efficiency based on the Pontryagin maximum principle (PMP) method. The authors find that the necessary optimal control modes for the problem are full power (FP), constrained partial power (CPP), coast (C), partial brake (PB), and full brake (FB). Especially, the FP‐C pair is proposed to replace the unreasonable cruising phase on the other‐non‐steep hill (ONSH). A two‐layer algorithm is designed to solve the problem and case studies are presented to illustrate the results. The influence of different train weights, different overall running times, and different kinds of traction system efficiency on the optimal driving strategy is analyzed.
18 October 2023 in Transportmetrica A: Transport Science
18 October 2023 in Transportmetrica A: Transport Science