Wide bandgap (WBG) device-based power electronics converters are more efficient and lightweight than Silicon-based converters. WBG devices are an enabling technology for many motor drive applications and new classes of compact and efficient motors. This paper reviews the potential applications and advances enabled by WBG devices in ac motor drives. Industrial motor drive products using WBG devices are reviewed and the benefits are highlighted. This paper also discusses the technical challenges, converter design considerations and design trade-offs in realizing the full potential of WBG devices in motor drives. There is a trade-off between high switching frequency and other issues such as high dv/dt and electromagnetic interference. The problems of high common mode currents and bearing and insulation damage, which are caused by high dv/dt, and the reliability of WBG devices are discussed.
26 March 2018 in IEEE Transactions on Transportation Electrification
This paper reviews the current state of the art of condition monitoring and fault diagnosis techniques for permanent magnet (PM) machines. It also takes into account the past research on this subject as appropriate. The discussion in the paper includes issues related to common abnormalities and specific faults in permanent magnet machines and drives, such as magnet damage and demagnetization, rotor eccentricity, unbalanced magnetic pull, open and short-circuit windings, and switch faults. In this paper, a detailed review is present on the sources of these faults, their analytical model and fault detection tools. Finally, an integrated methodology for condition monitoring of PM machines is discussed.
18 April 2018 in IEEE Transactions on Industry Applications
A magnetically geared machine (MGM) integrates a magnetic gear with a low torque, high speed electric machine to create a single compact high torque, low speed device with the size advantages of a mechanically geared system and the reliability of a direct drive machine. This work investigates the use of MGMs for wave energy conversion through the development of a large scale magnetically decoupled inner stator radial flux magnetically geared generator rated for 10 kW at an input speed of 30 rpm. Critical design trends are illustrated using parametric 2D and 3D finite element simulation results. Information is also provided about the prototype's mechanical structure and key magneto-mechanical design considerations, including the impact of modulator bridges and the extent of axially escaping leakage flux. The prototype's experimental stall torque of 3870 N-m represents a 99.1% match with the simulated stall torque and corresponds to volumetric and gravimetric torque densities of 82.8 kNμm/m$^{3}$ and 14.5 N-m/kg, respectively. Additionally, the prototype achieves an experimental efficiency of approximately 90% over much of its operating range.
13 November 2017 in IEEE Transactions on Industrial Electronics
Energy storage is crucial for both smart grids and renewable energy sources such as wind or solar, which are intermittent in nature. Compared to electrochemical batteries, flywheel energy storage systems (ESSs) offer many unique benefits such as low environmental impact, high power quality, and larger life cycles. This paper presents a novel utility-scale flywheel ESS that features a shaftless, hubless flywheel. The unique shaftless design gives it the potential of doubled energy density and a compact form factor. Its energy and power capacities are 100 kWh and 100 kW, respectively. The flywheel is made of high-strength steel, which makes it much easier to manufacture, assemble, and recycle. Steels also cost much less than composite materials. Design and analysis of the shaftless flywheel are presented first. In addition, the system incorporates a new combination active magnetic bearing. Its working principle and levitation control for the flywheel are discussed. The design of an integrated coreless permanent-magnet (PM) motor/generator for the flywheel is given as well. Initial test results show that the magnetic bearing provides stable levitation for the 5443-kg flywheel with small current consumption.
25 October 2017 in IEEE Transactions on Transportation Electrification
Interests in using rare-earth free motors such as switched reluctance motors (SRMs) for electric and hybrid electric vehicles (EV/HEVs) continue to gain popularity, owing to their low cost and robustness. Optimal design of an SRM, to meet specific characteristics for an application, should involve simultaneous optimization of the motor geometry and control in order to achieve the highest performance with the lowest cost. This paper presents a constrained multi-objective optimization framework for design and control of a SRM based on a nondominated sorting genetic algorithm II (NSGA-II). The proposed methodology optimizes SRM operation for high volume traction applications by considering multiple criteria including efficiency, average torque, and torque ripple. Several constraints are defined by the considered application, such as the motor stack length, outer diameter, minimum operating power, minimum desired efficiency, rated speed, rated current, and supply voltage. The outcome of this optimization includes an optimal geometry, outlining variables such as air gap length, rotor inner diameter, stator pole arc angle, rotor pole arc angle, rotor back iron, stator pole height, and stator inner diameter as well as optimal turn-on and turn-off firing angles. Then the machine is manufactured according to the obtained optimal specifications. Comprehensive finite element analysis (FEA) and experimental results are provided to validate the theoretical findings.
22 January 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Magnetic gears perform the same function as mechanical gears using magnetic fields instead of interlocking teeth. A review of the design processes used in the literature demonstrates that a critical design parameter, pole pair count, is often given inadequate consideration. In addition to reviewing the existing prototypes, this article uses a parametric simulation study to analyze the impacts of pole pair counts on gear performance and illustrate how the optimal pole counts vary with gear ratio and various design parameters. This article also introduces new ripple factors, which better correlate with torque ripple than the cogging factor ( $C_{T}$ ) used in previous articles, and illustrates why designs with noninteger gear ratios tend to have much smaller torque ripples than designs with integer gear ratios. While selecting the pole counts to minimize symmetry can reduce torque ripple, designs without any symmetry are shown to experience unbalanced magnetic forces on each rotor. Thus, it is recommended to select pole counts that result in an even number of modulators but not an integer gear ratio. This article also reveals that for a fixed gear ratio, a nontrivial optimum pole count minimizes the electromagnetic losses.