30 December 2018 in Mining of Mineral Deposits
DUDonetsk National Technical University
Donetsk National Technical University
30 June 2024 in Mining of Mineral Deposits
Purpose is to reveal physical essence of the dualistic (double) nature of deformation effects and their influence on the mechanical properties of protective structures made of broken rock while unloading coal-bearing mass to ensure stability of side rocks and operational conditions of the development mine working within the working areas of coal mines. Methods. The deformation properties of protective structures made of broken rock was modeled on experimental samples during their static load in terms of uniaxial compression with the possibility of lateral expansion of the original material or its compressive stress. Findings. A dualistic effect of deformations for the conditions of uniaxial compression of protective structures was revealed. Under the effect, a complex transformation of volume and shape occurs in the structures caused by the process of relative changes in the backfill material volume. The observed phenomenon occurs within the range of 0.12 ≤δV ≤ 0.32 and the values of the compaction coefficient of broken rock being 1.13≤k con. ≤ 1.47, depending on the granulometric composition of the source material and its bulk density. It was established that under conditions when broken rock is compressed, there is an effect of forming the bearing capacity of protective structures, which is observed when a relative change in the volume of backfill material is 0.14 ≤ δV ≤ 0.38, and its compaction factor reaches 1.16 ≤ kcon. ≤ 1.59. Depending on the homogeneity degree of the backfill material of protective structures, when comparing the values of kcon., a dualistic (double) effect is manifested in the difference of deformation characteristics of broken rock under uniaxial and compressive stress, reaching two or more times. Originality. A regularity was established that determines the relationship between compaction factor kcon. of broken rock and a relative change in the volume (δV) of backfill material, which makes it possible to evaluate bearing capacity of protective structures, being under static load in a stress-strain state. Practical implications. The research results can be used to substantiate the selection of a method to protect development mine working with flexible supports made of broken rock. To clarify the assessment of bearing capacity of such structures, it is advisable to carry out specific field studies in mine conditions.
28 April 2023 in Eastern-European Journal of Enterprise Technologies
The object of this study is the processes of managing the state of lateral rocks in the coal rock array with preparatory workings. The influence of deformation characteristics of the protective structures of the preparatory workings on the stability of lateral rocks in the coal rock array has been established. The stable state of the above-the-drift pillars of coal is provided within the deformation resource, which corresponds to the critical level of the specific potential energy of the deformation. The limits of the deformation resource are the range of change in the relative deformation of coal pillars 0.1≤λ≤0.25. When the critical level of the specific potential energy of deformation is passed, at λ˃0.25, there is a relative change in the volume of pillars δλ˃0,1, as a result of which their durability decreases and the state changes. Under such conditions, the residual strength of coal pillars is not enough to limit the movement of lateral rocks, which provokes their collapse. For protective structures made of crushed rock, within the established deformation resource of 0.4≤λ≤0.7, with an increase in static load and cross-sectional area, the specific potential energy of deformation decreases, simultaneously with the relative change in the volume of the embedded material. This is due to the compaction of the crushed rock and an increase in its strength. Regularities of change in the specific potential energy of deformation of protective structures have been established, which, under conditions of uniaxial compression, make it possible to assess, within the deformation resource, their stability. To ensure the stability of lateral rocks in the coal rock array and to preserve the operational condition of the preparatory workings, it is advisable to use protective structures made of crushed rock. This method will limit the movement of the roof and sole in the produced space and avoid collapses.
1 January 2018 in JOURNAL of Donetsk mining institute
PUPublic higher education institution Donetsk National Technical University
Public higher education institution Donetsk National Technical University
MUMine Rescue Brigade Minugleprom Of Ukraine
Mine Rescue Brigade Minugleprom Of Ukraine
+1
30 August 2025 in Technology audit and production reserves
The object of the study was the deformation processes in backfill masses made of crushed rock, which are used for roof control in mining panels. The study addressed the issue of preventing sidewall collapses by ensuring the stability of the backfill masses. Deformation processes were investigated using experimental models made of crushed rock that simulated various backfill structures. The study considered uniaxial compression of crushed rock with lateral expansion capability, as well as compressive loading. Uniaxial compression was used to simulate partial backfilling of the gob area, while compressive loading represented complete backfilling. Under loading conditions, a hyperbolic relationship was established between the relative volume change of the backfill material per unit of side rock convergence, ΔVK (m–1), and the compaction coefficient of crushed rock. This relationship enables the prediction of the material's ultimate settlement. The determining factor in this relationship is the relative deformation of the backfill mass. Under loading of crushed rock and comparable compaction coefficient values, the difference in deformation properties reaches 2.5 to 3 times. This is recorded due to the transformation of shape or change in volume under different compression conditions. It is shown that with an increase in the parameter ΔVK, the specific potential energy of deformation of the backfill material changes according to a logarithmic relationship. The specific potential energy of deformation is determined by the mechanical properties and compression conditions of the crushed rock. Maximum stability of gob-side retained entries can be ensured through complete backfilling of the gob area, while the expected subsidence of the backfill mass depends on the initial backfill density and the deformation properties of the crushed rock used for filling.
30 December 2023 in Mining of Mineral Deposits
Purpose is to assess deformation characteristics of protective structures while coal-rock mass off-loading to ensure wall rock stability as well as operating conditions of the development mine workings in coal mines. Methods. In a laboratory environment, uniaxial compression of protective structures has been applied on the models to identify the influence by deformation processes on the changes in their rigidness resulting from the shape and volume transformation. Findings. Under the deformation of rigid structures in the context of a safe strain resource, potential energy of their changes in shape is 4.1-6.5 times higher than the one of changes in volume. Beyond the safe deformation resource when critical level of the specific potential strain energy has been exceeded, strength of protective structures is not sufficient to restrict wall rock movement limiting their use. If relative volume variation in the rigid protective structures is δV > 0.06-0.082 then they lose their stability. Under such conditions, structural rigidity decreases by 14-22%. If pliable wooden protective structures are used then relative 0.62 ≤ δV ≤ 0.72 volume change doubles their rigidity. In the circumstances, the potential shape change energy is 2.1 times higher than the volume change energy; the abovementioned favours temporary compaction of wooden components of the compressive structure while improving its resistivity. Originality. Regularities of changes in the specific potential deformation energy of protective structures depending upon their shape and volume variation in terms of uniaxial compression have been identified. Practical implications. To ensure stability of wall rocks and maintain operating conditions of the development mine wor-kings, it is reasonable to apply pliable wooden protective structures which will help restrict roof and floor movements after their compaction. Insufficient residual strength of rigid protective structures, resulting if they lose their stability, provokes rock failure within the working areas of coal mines.