1 February 2018 in Physics of Plasmas
The results from the investigation of neoclassical core transport and the role of the radial electric field profile (Er) in the first operational phase of the Wendelstein 7-X (W7-X) stellarator are presented. In stellarator plasmas, the details of the Er profile are expected to have a strong effect on both the particle and heat fluxes. Investigation of the radial electric field is important in understanding neoclassical transport and in validation of neoclassical calculations. The radial electric field is closely related to the perpendicular plasma flow (u⊥) through the force balance equation. This allows the radial electric field to be inferred from measurements of the perpendicular flow velocity, which can be measured using the x-ray imaging crystal spectrometer and correlation reflectometry diagnostics. Large changes in the perpendicular rotation, on the order of Δu⊥∼ 5 km/s (ΔEr ∼ 12 kV/m), have been observed within a set of experiments where the heating power was stepped down from 2 MW to 0.6 MW. These experiments are examined in detail to explore the relationship between heating power temperature, and density profiles and the radial electric field. Finally, the inferred Er profiles are compared to initial neoclassical calculations based on measured plasma profiles. The results from several neoclassical codes, sfincs, fortec-3d, and dkes, are compared both with each other and the measurements. These comparisons show good agreement, giving confidence in the applicability of the neoclassical calculations to the W7-X configuration.
1 February 2002 in Nuclear Fusion
The radial electric field (Er) properties in LHD have been investigated to give guidance towards improved confinement with a possible Er transition and bifurcation. The ambipolar Er is calculated from the neoclassical flux on the basis of analytical formulas. This approach is appropriate to clarifying the Er properties over a wide parameter range in a more transparent way. A comparison between calculated Er and the experimental values has shown a qualitatively good agreement, for example, for the threshold density for the transition from the ion root to the electron root. The calculations also reproduce well the experimentally observed tendency that the electron root is possible by increasing temperatures even for higher density and the ion root is enhanced for higher density. On the basis of the usefulness of this approach, calculations over a wide range have been performed to clarify the parameter region where the Er transition and bifurcation are possible. This gives a comprehensive understanding of the parameter region of interest, which is valuable for the promotion of experiments towards improved confinement.
27 October 2016 in Nuclear Fusion
Achieving impurity and helium ash control is a crucial issue in the path towards fusion-grade magnetic confinement devices, and this is particularly the case of helical reactors, whose low-collisionality ion-root operation scenarios usually display a negative radial electric field which is expected to cause inwards impurity pinch. In this work we discuss, based on experimental measurements and standard predictions of neoclassical theory, how plasmas of very low ion collisionality, similar to those observed in the impurity hole of the large helical device (Yoshinuma et al and The LHD Experimental Group 2009 Nucl. Fusion 49 062002, Ida et al and The LHD Experimental Group 2009 Phys. Plasmas 16 056111 and Yokoyama et al and LHD Experimental Group 2002 Nucl. Fusion 42 143), can be an exception to this general rule, and how a negative radial electric field can coexist with an outward impurity flux. This interpretation is supported by comparison with documented discharges available in the International Stellarator-Heliotron Profile Database, and it can be extrapolated to show that achievement of high ion temperature in the core of helical devices is not fundamentally incompatible with low core impurity content.
29 October 2019 in Physical Review Letters
The isotope effect on energy confinement time and thermal transport has been investigated for plasmas confined by a stellarator-heliotron magnetic field. This is the first detailed assessment of an isotope effect in a stellarator heliotron. Hydrogen and deuterium plasmas heated by neutral beam injection on the Large Helical Device have exhibited no significant dependence on the isotope mass in thermal energy confinement time, which is not consistent with the simple gyro-Bohm model. A comparison of thermal diffusivity for dimensionally similar hydrogen and deuterium plasmas in terms of the gyroradius, collisionality, and thermal pressure has clearly shown robust confinement improvement in deuterium to compensate for the unfavorable mass dependence predicted by the gyro-Bohm model.
1 August 2010 in Fusion Science and Technology
Particle confinement processes are studied in detail on the Large Helical Device (LHD). Diffusion coefficients (D) and convection velocities (V) are estimated from density modulation experiments. The magnetic configuration and collisionality are widely scanned in order to investigate parameter dependences of D and V. To study the effect of the magnetic configuration, magnetic axis positions (Rax) are scanned from 3.5 to 3.9 m. This scan changes the magnetic ripples quite significantly, enabling the effects of neoclassical properties on measured values to be widely elucidated. Dependences of electron temperature (Te) and helically trapped normalized collisionality are examined using the heating power scan of neutral beam injection. It was found that generally larger (or smaller) contributions of neoclassical transport in the core region, where normalized position ρ < 0.7, resulted in more hollow (or peaked) density profiles. The larger neoclassical contribution was found to be situated at a more ou...
1 February 2000 in Nuclear Fusion
The roles of `bumpy' field on collisionless particle confinement in helical axis heliotrons are investigated with model magnetic field and particle orbit calculations in Boozer co-ordinates. The mod Bmin contours can be shifted in the major radius direction with control of the bumpy field, where Bmin is the minimum value of |B| in the toroidal direction within one field period. The area of closed mod Bmin contours is a useful measure with which to evaluate global collisionless particle confinement as long as the mod Bmin contours connect toroidally. The negative value of the ratio between the bumpy component and the helicity component contributes to obtaining the largest area of closed mod Bmin contours for a finite ratio between the toroidicity component and the helicity component. The radially increasing bumpy field contributes to the realization of a toroidally localized mod Bmin structure. It also produces a region with a large derivative of |B| with respect to the toroidal magnetic flux, which is well aligned to the toroidally localized mod Bmin structure. This enhances the large poloidal drift of the guiding centre orbits, while the radial drift is unaffected, effectively improving the particle confinement.