The tunability and controllability of conductance quantization mediated multilevel resistive switching (RS) memory devices, fabricated in crossbar geometry can be a promising alternative for boosting storage density. Here, we report fabrication of Cu/TiO2/Pt based RS devices in 8 × 8 crossbar geometry, which showed reliable bipolar RS operations. The crossbar devices showed excellent spatial and temporal variability, time retention and low switching voltage (<1 V) and current (∼100 μA). Furthermore, during the reset switching, highly repeatable and reliable integral and half-integral quantized conductance (QC) was observed. The observed QC phenomenon was attributed to the two dimensional confinement of electrons as lateral width of the conducting filament (CF) matches the fermi wavelength. The magnitude and number of the QC steps were found to increase from ∼2.5 to 12.5 and from 5 to 18, respectively by increasing the compliance current (IC) from 50 to 800 μA which also increased the diameter of the CF from ∼1.2 to 3.3 nm. The enhancement in both number and magnitude of QC states was explained using electrochemical dissolution mechanism of CF of varying diameter. A thicker CF, formed at higher IC, undergoes a gradual rupture during reset process yielding a greater number of QC steps compared to a thinner CF. The realisation of QC states in the crossbar Cu/TiO2/Pt device as well as IC mediated tunability of their magnitude and number may find applications in high-density resistive memory storage devices and neuromorphic computing.
We have investigated the structural, transport, and electronic properties of Co1-xMnxSn single crystals with x = 0.01, 0.05, and 0.08, where an Mn atom doped at the site of a Co atom acts like hole doping. An increase in x causes the expansion of the Kagome lattice with notemperature-dependent structural phase transition. Both resistivity and the Seebeck coefficient as a function of temperature showed an anomalous behavior for x = 0.05 ascompared to x = 0.01 and 0.08. A large thermoelectric power factor of 7 mWm-1K-2at 300 K is obtained for x = 0.05. Core-level broadening observed with increasing xhas been associated with enhanced hybridization between the valence electrons. Thechanges in the valence band spectra have been interpreted with the help of electronicdensity of states obtained from the density functional theory calculations. The topological flat band is found to exist at-0.14 eV below EF for all x. The density of Mn3d states not only increases but also shifts towards EF with increasing x. The Coulombcorrelation energy of Co 3d states is found to increase with increasing x. The signatureof valence fluctuating divalent and trivalent Co and Mn 3d states observed in the resonant photoemission experiments is supported by X-ray absorption Co and Mn L2,3 edgespectra. Thus, the behavior of the thermoelectric power factor for different x is found todepend on the density of divalent and trivalent Co and Mn 3d states at EF.
Metal–support interaction plays important role in governing the activity and stability of Pt–carbon catalysts for hydrogen energy applications. In this work, a structure–property correlation of Pt catalysts supported on carbon aerogels synthesized via four different routes: water-based (CA-W), freeze-dried (CA-FD), isopropanol-based (CA-IPA), and nitrogen-doped (CA-N) are investigated. All the samples exhibit hierarchical micro–mesoporous structures measured by Gas adsorption technique, with CA-FD having highest surface area of ~1271 m²/g. Chemisorption analysis reveal superior Pt dispersion (>30%) for CA-FD. For atomic-scale insights, Pt coordination and electronic structure of these catalysts are investigated using synchrotron X-ray absorption spectroscopy. XANES spectra of Pt/CA samples display moderately enhanced white-line intensity which indicates a higher density of unoccupied Pt 5d states may be attributed to partial electron transfer from Pt to the carbon matrix. Two coordination regimes are identified by EXAFS analyses. Pt/CA-W and Pt/CA-IPA are dominated by Pt–C coordination, whereas Pt nano-domains are indicated for Pt/CA-FD and Pt/CA-N having mixed Pt–C and Pt–Pt coordination. The balance between metallic character and metal support interaction in Pt/CA-FD and Pt/CA-N makes them promising catalysts for hydrogen energy applications.