1 March 2021 in Ceramics International
10 February 2020 in IEEE Transactions on Applied Superconductivity
The High Intensity Heavy Ion Accelerator Facility (HIAF) is a new engineering project proposed by Institute of Modern Physics (IMP) of China. Various types of superconducting wires with the matrix of CuNi alloy for HIAF project were successfully developed by WST. NbTi/Cu5Ni superconducting wires with filaments number of 10800, 12960, 15984, 23760, 36720 and 44064 were designed and fabricated by a double stacking method. In this study, the microstructure and influence of a heat treatment on the critical current density, hysteresis loss and number of breaks of NbTi/Cu5Ni superconducting wire are investigated. It is demonstrated that when the number of heat treatments increases from 3 to 5, the critical current density increases from 2324 to 2699 A/mm 2 at 5T&4.2K for a 10800-filament wire. However, the number of breaks per one billet increases from 0 to 3. The maximum and minimum piece length is 3500 and 1000 m, respectively. The Nb barrier fracture results in the formation of the Ti-Cu compound between NbTi filaments and Copper during intermediate heat treatment. By reducing the Cu/Sc of sub-elements and improving the Cu shell thickness of the final billet, the deformation of outer filament is relatively favorable, which can enhance the critical current density and reduce hysteresis loss. The critical current density of six designed wires is between 2600 and 2700 A/mm 2 and ‘n’ value is between 35 and 48 at 5T&4.2K, indicating a high filament quality and that no filament breakage occurs in the wire. The Cu5Ni alloy is regarded as the inter-filament matrix to reduce inter-filament coupling currents loss. When the filament number increases from 10800 to 44064 and the diameter of NbTi filament reduces from 4.5 to 2.5 μm, the hysteresis losses reduce from 38.5 to 26.2 mJ/cm 3 at ±3T. The average piece length of six designed wires is more than 2000 m, revealing the ability of mass production for WST. After 5 years investigations WST have developed several designs and the fabrication technology of this type of wire and can completely satisfy the requirements of HIAF magnets.
3 November 2022 in Chinese Science Bulletin
通过电学有效驱动磁畴壁运动是自旋电子学领域的重要研究内容之一,其中零磁场下基于自旋轨道力矩效应驱动磁矩翻转是一种重要的磁畴壁运动调控方式。为了进一步实现低功耗、高速度、高效率的磁畴壁运动,本工作中研究了非共线自旋源所产生的区别于传统型自旋轨道力矩对磁畴的驱动行为。我们利用微磁学模拟研究了自旋流中类 Rashba 的 Sy、类 Dresselhaus 的 Sx 和垂直于膜面Sz三种自旋极化下自旋轨道力矩驱动畴壁运动不同;并阐明对布洛赫畴壁(Bloch wall)、奈尔畴壁(Ne ́el wall)和头对头畴壁(Head-To-Head wall)三种不同磁畴壁的驱动及畴壁性质的影响。本工作对于理解基于非共线自旋源的自旋轨道力矩驱动畴壁运动具有一定意义,为新型自旋电子器件的开发和应用提供了物理基础。