15 December 2023 in Tungsten
31 December 2022 in Journal of Colloid and Interface Science
25 November 2022 in Energy
1 March 2016 in Journal of Crystal Growth
16 April 2020 in Plastics, Rubber and Composites: Macromolecular Engineering
In this study, a green and efficient method was demonstrated to produce few-layer graphene (FLG) with high quality and yield via liquid-phase exfoliation (LPE) of graphite in sodium dodecyl benzenesulfonate aqueous solution by sonication. The final concentration of the as-prepared graphene was 0.96 mg mL−1 with a lateral size of about 2 μm after 2 h of sonication exfoliation. In addition, the polyamide 6/the exfoliated graphene (PA6/EG) nanocomposites were successfully fabricated by melt-blending injection. The effects of loading of EG on the mechanical properties of PA6 composites were systematically investigated. A noticeable enhancement was achieved on the PA6/EG nanocomposites. Compared with pure PA6, when the loading of EG is only 0.3 wt-%, the significant tensile strength and Young's modulus were increased by 26.7 and 21.1%, respectively, of PA6/EG composites. This green and easy process provides a choice for the application of high-performance graphene-based polymer composites.
8 May 2021 in Plastics, Rubber and Composites: Macromolecular Engineering
A solvent-free and easy method to directly functionalize pristine graphene by maleic anhydride (MA) based on Diels-Alder cycloaddition reaction was reported. Functionalized graphene/Polyamide 66 (FGN/PA66) composite fibers were fabricated by melt-spinning as a potential industrial application. The results show that the functionalized graphene has compatibilized the interface and increased the dispersibility in the PA66 matrix, which leads to an improvement in mechanical properties. When the content of filler was 0.2 wt%, the fracture strength of graphene/PA66 and FGN/PA66 composite fibers reached the maximum value of 584 MPa and 678 MPa, respectively, which were 88.4% and 118.8% higher than that of pure PA66 fiber. It’s believed the functionalized graphene will facilitate the industrial scale fabrication of graphene based composite and the FGN/PA66 composite fibers with higher mechanical properties will expand the application of PA66.