23 October 2025 in Journal of Laser Applications
The increasing demand for electric vehicles has highlighted the need for high-speed, high-quality welding of copper components used in motors and batteries. Blue laser welding, offering high optical absorption in copper, is a promising alternative to arc welding. However, quality monitoring methods remain underdeveloped. In this study, we developed a laser welding system integrating a high-power blue laser, galvanometer scanning, and thermal radiation imaging to evaluate the temperature distribution during welding. Two wavelengths in the near-infrared wavelength range were measured to estimate the temperature using two-color pyrometry. The thermal radiation distribution was found to correlate with the molten pool size, while temporal fluctuations in radiation intensity were attributed to dynamic changes in the shape of the molten pool surface. Notably, inconsistencies were observed between thermal radiation intensity and temperature values derived from separate single-wavelength measurements. This result indicates that thermal radiation imaging using a single wavelength band is insufficient for accurately evaluating absolute temperature or temperature distributions and confirms the importance of multiwavelength measurements for reliable temperature estimation.
12 January 2026 in Journal of Laser Applications
A hybrid laser welding system was developed to enable high-speed, spatter-suppressed joining of pure copper conductors, aimed at applications such as electric motor manufacturing. The system combines a 2 kW infrared (IR) single-mode fiber laser with a 3 kW blue diode laser, along with a high-speed galvanometer scanner for precise beam control. The blue laser, exhibiting high absorption in solid copper, initiates rapid surface melting, while the IR laser efficiently forms a keyhole by leveraging enhanced absorption in the liquid phase. Experiments on 2 × 4 mm copper wires revealed that increasing the scan speed reduced weld size, primarily due to decreased energy absorption associated with shallower keyhole formation. Spatter evaluation using high-speed imaging showed a significant reduction in spatter at higher scan speeds. A scan speed of 1500 mm/s was identified as optimal, achieving a weld length of 2 mm within 0.15 s while minimizing spatter. These results demonstrate the effectiveness of the hybrid laser configuration in achieving efficient, high-quality copper welding suitable for high-throughput industrial applications.