8 March 2021 in Journal of Rheology
For the nanoparticle-filled polymers, weak attractive interactions between nanoparticles lead to agglomeration and even formation of a network of nanoparticles in the polymer matrix. Both the agglomeration and the deagglomeration (breakdown) of the particle network are affected by the shear flow, resulting in shear-induced liquid-solid (L-S) transition and shear-induced solid-liquid (S-L) transition, respectively. In this study, we quantify the percolation threshold of both transitions under shear-induced agglomeration and shear-induced breakdown processes. Both the present shear condition and the preshear condition affect the percolation threshold, which turns to only shear rate dependence under steady shear condition, indicating no shear hysteresis. A scaling relation is suggested to describe the percolation threshold at low shear rate. The critical strains at both S-L and L-S transitions are inversely proportional to the distance of the particle concentration to the percolation concentration under steady shear. The apparent phase boundary under shear, represented by the shear rate and shear history-dependent percolation threshold, is further conceptually converted to the space of structural parameter, from which the possible transitions pathway under steady shear are discussed.
1 October 2021 in Polymer
1 January 2020 in Journal of Rheology
Extensional flow plays a significant role in many processing operations of polymer melts. However, for slender polymer melts, the measurements of the extensional behavior were strongly limited by the gravitational sagging effect in the Sentmanat extensional rheometry (SER). In this work, a new extensional rheometry was designed to combine the merits of the SER and the rheometric melt elongation rheometer. The new fixture was sufficiently miniaturized to be adapted to the environment chamber of a commercial rotational rheometer. During the measurements, the samples were supported by a base lubricated by oil or microfine polytetrafluorethylene powder to effectively reduce the friction and sagging effects. The new design was validated, using materials with a wide range of viscosities, to extend the low viscosity limit to about two decades compared with the SER fixture, i.e., from ∼104 to ∼102 Pa s.Extensional flow plays a significant role in many processing operations of polymer melts. However, for slender polymer melts, the measurements of the extensional behavior were strongly limited by the gravitational sagging effect in the Sentmanat extensional rheometry (SER). In this work, a new extensional rheometry was designed to combine the merits of the SER and the rheometric melt elongation rheometer. The new fixture was sufficiently miniaturized to be adapted to the environment chamber of a commercial rotational rheometer. During the measurements, the samples were supported by a base lubricated by oil or microfine polytetrafluorethylene powder to effectively reduce the friction and sagging effects. The new design was validated, using materials with a wide range of viscosities, to extend the low viscosity limit to about two decades compared with the SER fixture, i.e., from ∼104 to ∼102 Pa s.
1 November 2021 in Journal of Rheology
The effect of the wall on the fiber orientation distribution plays a central role in many industrial flows, including thin-wall injection molding, 3D printing, and flow in pores. Though the wall-effect region has been visualized experimentally, the nature and thickness of the layer lack understanding and quantitative study. The present work deals with this wall-effect of fiber suspensions over a broad concentration regime, from dilute to concentrated. We seek to quantify the wall-effect region of the fiber suspensions by combining rheology and microscope image analysis methods, which prove to be well consistent with each other. We find that the characteristic thickness of the wall-effect increases with the fiber content and reaches about two times the fiber length for 40 wt. % fiber suspension. The overall distance of wall influence can be as high as 10–50 times the fiber length. This phenomenon cannot be described by the available models with or without consideration of the wall-effect.
12 April 2023 in Macromolecules